uchar.h File Reference

C API: Unicode Properties. More...

#include "unicode/utypes.h"

Go to the source code of this file.

Defines

#define U_UNICODE_VERSION   "5.2"
 Unicode version number, default for the current ICU version.
#define UCHAR_MIN_VALUE   0
 Constants.
#define UCHAR_MAX_VALUE   0x10ffff
 The highest Unicode code point value (scalar value) according to The Unicode Standard.
#define U_MASK(x)   ((uint32_t)1<<(x))
 Get a single-bit bit set (a flag) from a bit number 0..31.
#define U_GC_CN_MASK   U_MASK(U_GENERAL_OTHER_TYPES)
 U_GC_XX_MASK constants are bit flags corresponding to Unicode general category values.
#define U_GC_LU_MASK   U_MASK(U_UPPERCASE_LETTER)
 Mask constant for a UCharCategory.
#define U_GC_LL_MASK   U_MASK(U_LOWERCASE_LETTER)
 Mask constant for a UCharCategory.
#define U_GC_LT_MASK   U_MASK(U_TITLECASE_LETTER)
 Mask constant for a UCharCategory.
#define U_GC_LM_MASK   U_MASK(U_MODIFIER_LETTER)
 Mask constant for a UCharCategory.
#define U_GC_LO_MASK   U_MASK(U_OTHER_LETTER)
 Mask constant for a UCharCategory.
#define U_GC_MN_MASK   U_MASK(U_NON_SPACING_MARK)
 Mask constant for a UCharCategory.
#define U_GC_ME_MASK   U_MASK(U_ENCLOSING_MARK)
 Mask constant for a UCharCategory.
#define U_GC_MC_MASK   U_MASK(U_COMBINING_SPACING_MARK)
 Mask constant for a UCharCategory.
#define U_GC_ND_MASK   U_MASK(U_DECIMAL_DIGIT_NUMBER)
 Mask constant for a UCharCategory.
#define U_GC_NL_MASK   U_MASK(U_LETTER_NUMBER)
 Mask constant for a UCharCategory.
#define U_GC_NO_MASK   U_MASK(U_OTHER_NUMBER)
 Mask constant for a UCharCategory.
#define U_GC_ZS_MASK   U_MASK(U_SPACE_SEPARATOR)
 Mask constant for a UCharCategory.
#define U_GC_ZL_MASK   U_MASK(U_LINE_SEPARATOR)
 Mask constant for a UCharCategory.
#define U_GC_ZP_MASK   U_MASK(U_PARAGRAPH_SEPARATOR)
 Mask constant for a UCharCategory.
#define U_GC_CC_MASK   U_MASK(U_CONTROL_CHAR)
 Mask constant for a UCharCategory.
#define U_GC_CF_MASK   U_MASK(U_FORMAT_CHAR)
 Mask constant for a UCharCategory.
#define U_GC_CO_MASK   U_MASK(U_PRIVATE_USE_CHAR)
 Mask constant for a UCharCategory.
#define U_GC_CS_MASK   U_MASK(U_SURROGATE)
 Mask constant for a UCharCategory.
#define U_GC_PD_MASK   U_MASK(U_DASH_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_PS_MASK   U_MASK(U_START_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_PE_MASK   U_MASK(U_END_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_PC_MASK   U_MASK(U_CONNECTOR_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_PO_MASK   U_MASK(U_OTHER_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_SM_MASK   U_MASK(U_MATH_SYMBOL)
 Mask constant for a UCharCategory.
#define U_GC_SC_MASK   U_MASK(U_CURRENCY_SYMBOL)
 Mask constant for a UCharCategory.
#define U_GC_SK_MASK   U_MASK(U_MODIFIER_SYMBOL)
 Mask constant for a UCharCategory.
#define U_GC_SO_MASK   U_MASK(U_OTHER_SYMBOL)
 Mask constant for a UCharCategory.
#define U_GC_PI_MASK   U_MASK(U_INITIAL_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_PF_MASK   U_MASK(U_FINAL_PUNCTUATION)
 Mask constant for a UCharCategory.
#define U_GC_L_MASK   (U_GC_LU_MASK|U_GC_LL_MASK|U_GC_LT_MASK|U_GC_LM_MASK|U_GC_LO_MASK)
 Mask constant for multiple UCharCategory bits (L Letters).
#define U_GC_LC_MASK   (U_GC_LU_MASK|U_GC_LL_MASK|U_GC_LT_MASK)
 Mask constant for multiple UCharCategory bits (LC Cased Letters).
#define U_GC_M_MASK   (U_GC_MN_MASK|U_GC_ME_MASK|U_GC_MC_MASK)
 Mask constant for multiple UCharCategory bits (M Marks).
#define U_GC_N_MASK   (U_GC_ND_MASK|U_GC_NL_MASK|U_GC_NO_MASK)
 Mask constant for multiple UCharCategory bits (N Numbers).
#define U_GC_Z_MASK   (U_GC_ZS_MASK|U_GC_ZL_MASK|U_GC_ZP_MASK)
 Mask constant for multiple UCharCategory bits (Z Separators).
#define U_GC_C_MASK   (U_GC_CN_MASK|U_GC_CC_MASK|U_GC_CF_MASK|U_GC_CO_MASK|U_GC_CS_MASK)
 Mask constant for multiple UCharCategory bits (C Others).
#define U_GC_P_MASK
 Mask constant for multiple UCharCategory bits (P Punctuation).
#define U_GC_S_MASK   (U_GC_SM_MASK|U_GC_SC_MASK|U_GC_SK_MASK|U_GC_SO_MASK)
 Mask constant for multiple UCharCategory bits (S Symbols).
#define U_NO_NUMERIC_VALUE   ((double)-123456789.)
 Special value that is returned by u_getNumericValue when no numeric value is defined for a code point.
#define U_GET_GC_MASK(c)   U_MASK(u_charType(c))
 Get a single-bit bit set for the general category of a character.
#define U_FOLD_CASE_DEFAULT   0
 Option value for case folding: use default mappings defined in CaseFolding.txt.
#define U_FOLD_CASE_EXCLUDE_SPECIAL_I   1
 Option value for case folding:.

Typedefs

typedef enum UBlockCode UBlockCode
typedef UBool UCharEnumTypeRange (const void *context, UChar32 start, UChar32 limit, UCharCategory type)
 Callback from u_enumCharTypes(), is called for each contiguous range of code points c (where start<=c<limit) with the same Unicode general category ("character type").
typedef UBool UEnumCharNamesFn (void *context, UChar32 code, UCharNameChoice nameChoice, const char *name, int32_t length)
 Type of a callback function for u_enumCharNames() that gets called for each Unicode character with the code point value and the character name.

Enumerations

enum  UProperty {
  UCHAR_ALPHABETIC = 0, UCHAR_BINARY_START = UCHAR_ALPHABETIC, UCHAR_ASCII_HEX_DIGIT = 1, UCHAR_BIDI_CONTROL = 2,
  UCHAR_BIDI_MIRRORED = 3, UCHAR_DASH = 4, UCHAR_DEFAULT_IGNORABLE_CODE_POINT = 5, UCHAR_DEPRECATED = 6,
  UCHAR_DIACRITIC = 7, UCHAR_EXTENDER = 8, UCHAR_FULL_COMPOSITION_EXCLUSION = 9, UCHAR_GRAPHEME_BASE = 10,
  UCHAR_GRAPHEME_EXTEND = 11, UCHAR_GRAPHEME_LINK = 12, UCHAR_HEX_DIGIT = 13, UCHAR_HYPHEN = 14,
  UCHAR_ID_CONTINUE = 15, UCHAR_ID_START = 16, UCHAR_IDEOGRAPHIC = 17, UCHAR_IDS_BINARY_OPERATOR = 18,
  UCHAR_IDS_TRINARY_OPERATOR = 19, UCHAR_JOIN_CONTROL = 20, UCHAR_LOGICAL_ORDER_EXCEPTION = 21, UCHAR_LOWERCASE = 22,
  UCHAR_MATH = 23, UCHAR_NONCHARACTER_CODE_POINT = 24, UCHAR_QUOTATION_MARK = 25, UCHAR_RADICAL = 26,
  UCHAR_SOFT_DOTTED = 27, UCHAR_TERMINAL_PUNCTUATION = 28, UCHAR_UNIFIED_IDEOGRAPH = 29, UCHAR_UPPERCASE = 30,
  UCHAR_WHITE_SPACE = 31, UCHAR_XID_CONTINUE = 32, UCHAR_XID_START = 33, UCHAR_CASE_SENSITIVE = 34,
  UCHAR_S_TERM = 35, UCHAR_VARIATION_SELECTOR = 36, UCHAR_NFD_INERT = 37, UCHAR_NFKD_INERT = 38,
  UCHAR_NFC_INERT = 39, UCHAR_NFKC_INERT = 40, UCHAR_SEGMENT_STARTER = 41, UCHAR_PATTERN_SYNTAX = 42,
  UCHAR_PATTERN_WHITE_SPACE = 43, UCHAR_POSIX_ALNUM = 44, UCHAR_POSIX_BLANK = 45, UCHAR_POSIX_GRAPH = 46,
  UCHAR_POSIX_PRINT = 47, UCHAR_POSIX_XDIGIT = 48, UCHAR_CASED = 49, UCHAR_CASE_IGNORABLE = 50,
  UCHAR_CHANGES_WHEN_LOWERCASED = 51, UCHAR_CHANGES_WHEN_UPPERCASED = 52, UCHAR_CHANGES_WHEN_TITLECASED = 53, UCHAR_CHANGES_WHEN_CASEFOLDED = 54,
  UCHAR_CHANGES_WHEN_CASEMAPPED = 55, UCHAR_CHANGES_WHEN_NFKC_CASEFOLDED = 56, UCHAR_BINARY_LIMIT = 57, UCHAR_BIDI_CLASS = 0x1000,
  UCHAR_INT_START = UCHAR_BIDI_CLASS, UCHAR_BLOCK = 0x1001, UCHAR_CANONICAL_COMBINING_CLASS = 0x1002, UCHAR_DECOMPOSITION_TYPE = 0x1003,
  UCHAR_EAST_ASIAN_WIDTH = 0x1004, UCHAR_GENERAL_CATEGORY = 0x1005, UCHAR_JOINING_GROUP = 0x1006, UCHAR_JOINING_TYPE = 0x1007,
  UCHAR_LINE_BREAK = 0x1008, UCHAR_NUMERIC_TYPE = 0x1009, UCHAR_SCRIPT = 0x100A, UCHAR_HANGUL_SYLLABLE_TYPE = 0x100B,
  UCHAR_NFD_QUICK_CHECK = 0x100C, UCHAR_NFKD_QUICK_CHECK = 0x100D, UCHAR_NFC_QUICK_CHECK = 0x100E, UCHAR_NFKC_QUICK_CHECK = 0x100F,
  UCHAR_LEAD_CANONICAL_COMBINING_CLASS = 0x1010, UCHAR_TRAIL_CANONICAL_COMBINING_CLASS = 0x1011, UCHAR_GRAPHEME_CLUSTER_BREAK = 0x1012, UCHAR_SENTENCE_BREAK = 0x1013,
  UCHAR_WORD_BREAK = 0x1014, UCHAR_INT_LIMIT = 0x1015, UCHAR_GENERAL_CATEGORY_MASK = 0x2000, UCHAR_MASK_START = UCHAR_GENERAL_CATEGORY_MASK,
  UCHAR_MASK_LIMIT = 0x2001, UCHAR_NUMERIC_VALUE = 0x3000, UCHAR_DOUBLE_START = UCHAR_NUMERIC_VALUE, UCHAR_DOUBLE_LIMIT = 0x3001,
  UCHAR_AGE = 0x4000, UCHAR_STRING_START = UCHAR_AGE, UCHAR_BIDI_MIRRORING_GLYPH = 0x4001, UCHAR_CASE_FOLDING = 0x4002,
  UCHAR_ISO_COMMENT = 0x4003, UCHAR_LOWERCASE_MAPPING = 0x4004, UCHAR_NAME = 0x4005, UCHAR_SIMPLE_CASE_FOLDING = 0x4006,
  UCHAR_SIMPLE_LOWERCASE_MAPPING = 0x4007, UCHAR_SIMPLE_TITLECASE_MAPPING = 0x4008, UCHAR_SIMPLE_UPPERCASE_MAPPING = 0x4009, UCHAR_TITLECASE_MAPPING = 0x400A,
  UCHAR_UNICODE_1_NAME = 0x400B, UCHAR_UPPERCASE_MAPPING = 0x400C, UCHAR_STRING_LIMIT = 0x400D, UCHAR_INVALID_CODE = -1
}
 

Selection constants for Unicode properties.

More...
enum  UCharCategory {
  U_UNASSIGNED = 0, U_GENERAL_OTHER_TYPES = 0, U_UPPERCASE_LETTER = 1, U_LOWERCASE_LETTER = 2,
  U_TITLECASE_LETTER = 3, U_MODIFIER_LETTER = 4, U_OTHER_LETTER = 5, U_NON_SPACING_MARK = 6,
  U_ENCLOSING_MARK = 7, U_COMBINING_SPACING_MARK = 8, U_DECIMAL_DIGIT_NUMBER = 9, U_LETTER_NUMBER = 10,
  U_OTHER_NUMBER = 11, U_SPACE_SEPARATOR = 12, U_LINE_SEPARATOR = 13, U_PARAGRAPH_SEPARATOR = 14,
  U_CONTROL_CHAR = 15, U_FORMAT_CHAR = 16, U_PRIVATE_USE_CHAR = 17, U_SURROGATE = 18,
  U_DASH_PUNCTUATION = 19, U_START_PUNCTUATION = 20, U_END_PUNCTUATION = 21, U_CONNECTOR_PUNCTUATION = 22,
  U_OTHER_PUNCTUATION = 23, U_MATH_SYMBOL = 24, U_CURRENCY_SYMBOL = 25, U_MODIFIER_SYMBOL = 26,
  U_OTHER_SYMBOL = 27, U_INITIAL_PUNCTUATION = 28, U_FINAL_PUNCTUATION = 29, U_CHAR_CATEGORY_COUNT
}
 

Data for enumerated Unicode general category types.

More...
enum  UCharDirection {
  U_LEFT_TO_RIGHT = 0, U_RIGHT_TO_LEFT = 1, U_EUROPEAN_NUMBER = 2, U_EUROPEAN_NUMBER_SEPARATOR = 3,
  U_EUROPEAN_NUMBER_TERMINATOR = 4, U_ARABIC_NUMBER = 5, U_COMMON_NUMBER_SEPARATOR = 6, U_BLOCK_SEPARATOR = 7,
  U_SEGMENT_SEPARATOR = 8, U_WHITE_SPACE_NEUTRAL = 9, U_OTHER_NEUTRAL = 10, U_LEFT_TO_RIGHT_EMBEDDING = 11,
  U_LEFT_TO_RIGHT_OVERRIDE = 12, U_RIGHT_TO_LEFT_ARABIC = 13, U_RIGHT_TO_LEFT_EMBEDDING = 14, U_RIGHT_TO_LEFT_OVERRIDE = 15,
  U_POP_DIRECTIONAL_FORMAT = 16, U_DIR_NON_SPACING_MARK = 17, U_BOUNDARY_NEUTRAL = 18, U_CHAR_DIRECTION_COUNT
}
 

This specifies the language directional property of a character set.

More...
enum  UBlockCode {
  UBLOCK_NO_BLOCK = 0, UBLOCK_BASIC_LATIN = 1, UBLOCK_LATIN_1_SUPPLEMENT = 2, UBLOCK_LATIN_EXTENDED_A = 3,
  UBLOCK_LATIN_EXTENDED_B = 4, UBLOCK_IPA_EXTENSIONS = 5, UBLOCK_SPACING_MODIFIER_LETTERS = 6, UBLOCK_COMBINING_DIACRITICAL_MARKS = 7,
  UBLOCK_GREEK = 8, UBLOCK_CYRILLIC = 9, UBLOCK_ARMENIAN = 10, UBLOCK_HEBREW = 11,
  UBLOCK_ARABIC = 12, UBLOCK_SYRIAC = 13, UBLOCK_THAANA = 14, UBLOCK_DEVANAGARI = 15,
  UBLOCK_BENGALI = 16, UBLOCK_GURMUKHI = 17, UBLOCK_GUJARATI = 18, UBLOCK_ORIYA = 19,
  UBLOCK_TAMIL = 20, UBLOCK_TELUGU = 21, UBLOCK_KANNADA = 22, UBLOCK_MALAYALAM = 23,
  UBLOCK_SINHALA = 24, UBLOCK_THAI = 25, UBLOCK_LAO = 26, UBLOCK_TIBETAN = 27,
  UBLOCK_MYANMAR = 28, UBLOCK_GEORGIAN = 29, UBLOCK_HANGUL_JAMO = 30, UBLOCK_ETHIOPIC = 31,
  UBLOCK_CHEROKEE = 32, UBLOCK_UNIFIED_CANADIAN_ABORIGINAL_SYLLABICS = 33, UBLOCK_OGHAM = 34, UBLOCK_RUNIC = 35,
  UBLOCK_KHMER = 36, UBLOCK_MONGOLIAN = 37, UBLOCK_LATIN_EXTENDED_ADDITIONAL = 38, UBLOCK_GREEK_EXTENDED = 39,
  UBLOCK_GENERAL_PUNCTUATION = 40, UBLOCK_SUPERSCRIPTS_AND_SUBSCRIPTS = 41, UBLOCK_CURRENCY_SYMBOLS = 42, UBLOCK_COMBINING_MARKS_FOR_SYMBOLS = 43,
  UBLOCK_LETTERLIKE_SYMBOLS = 44, UBLOCK_NUMBER_FORMS = 45, UBLOCK_ARROWS = 46, UBLOCK_MATHEMATICAL_OPERATORS = 47,
  UBLOCK_MISCELLANEOUS_TECHNICAL = 48, UBLOCK_CONTROL_PICTURES = 49, UBLOCK_OPTICAL_CHARACTER_RECOGNITION = 50, UBLOCK_ENCLOSED_ALPHANUMERICS = 51,
  UBLOCK_BOX_DRAWING = 52, UBLOCK_BLOCK_ELEMENTS = 53, UBLOCK_GEOMETRIC_SHAPES = 54, UBLOCK_MISCELLANEOUS_SYMBOLS = 55,
  UBLOCK_DINGBATS = 56, UBLOCK_BRAILLE_PATTERNS = 57, UBLOCK_CJK_RADICALS_SUPPLEMENT = 58, UBLOCK_KANGXI_RADICALS = 59,
  UBLOCK_IDEOGRAPHIC_DESCRIPTION_CHARACTERS = 60, UBLOCK_CJK_SYMBOLS_AND_PUNCTUATION = 61, UBLOCK_HIRAGANA = 62, UBLOCK_KATAKANA = 63,
  UBLOCK_BOPOMOFO = 64, UBLOCK_HANGUL_COMPATIBILITY_JAMO = 65, UBLOCK_KANBUN = 66, UBLOCK_BOPOMOFO_EXTENDED = 67,
  UBLOCK_ENCLOSED_CJK_LETTERS_AND_MONTHS = 68, UBLOCK_CJK_COMPATIBILITY = 69, UBLOCK_CJK_UNIFIED_IDEOGRAPHS_EXTENSION_A = 70, UBLOCK_CJK_UNIFIED_IDEOGRAPHS = 71,
  UBLOCK_YI_SYLLABLES = 72, UBLOCK_YI_RADICALS = 73, UBLOCK_HANGUL_SYLLABLES = 74, UBLOCK_HIGH_SURROGATES = 75,
  UBLOCK_HIGH_PRIVATE_USE_SURROGATES = 76, UBLOCK_LOW_SURROGATES = 77, UBLOCK_PRIVATE_USE = 78, UBLOCK_PRIVATE_USE_AREA = UBLOCK_PRIVATE_USE,
  UBLOCK_CJK_COMPATIBILITY_IDEOGRAPHS = 79, UBLOCK_ALPHABETIC_PRESENTATION_FORMS = 80, UBLOCK_ARABIC_PRESENTATION_FORMS_A = 81, UBLOCK_COMBINING_HALF_MARKS = 82,
  UBLOCK_CJK_COMPATIBILITY_FORMS = 83, UBLOCK_SMALL_FORM_VARIANTS = 84, UBLOCK_ARABIC_PRESENTATION_FORMS_B = 85, UBLOCK_SPECIALS = 86,
  UBLOCK_HALFWIDTH_AND_FULLWIDTH_FORMS = 87, UBLOCK_OLD_ITALIC = 88, UBLOCK_GOTHIC = 89, UBLOCK_DESERET = 90,
  UBLOCK_BYZANTINE_MUSICAL_SYMBOLS = 91, UBLOCK_MUSICAL_SYMBOLS = 92, UBLOCK_MATHEMATICAL_ALPHANUMERIC_SYMBOLS = 93, UBLOCK_CJK_UNIFIED_IDEOGRAPHS_EXTENSION_B = 94,
  UBLOCK_CJK_COMPATIBILITY_IDEOGRAPHS_SUPPLEMENT = 95, UBLOCK_TAGS = 96, UBLOCK_CYRILLIC_SUPPLEMENTARY = 97, UBLOCK_CYRILLIC_SUPPLEMENT = UBLOCK_CYRILLIC_SUPPLEMENTARY,
  UBLOCK_TAGALOG = 98, UBLOCK_HANUNOO = 99, UBLOCK_BUHID = 100, UBLOCK_TAGBANWA = 101,
  UBLOCK_MISCELLANEOUS_MATHEMATICAL_SYMBOLS_A = 102, UBLOCK_SUPPLEMENTAL_ARROWS_A = 103, UBLOCK_SUPPLEMENTAL_ARROWS_B = 104, UBLOCK_MISCELLANEOUS_MATHEMATICAL_SYMBOLS_B = 105,
  UBLOCK_SUPPLEMENTAL_MATHEMATICAL_OPERATORS = 106, UBLOCK_KATAKANA_PHONETIC_EXTENSIONS = 107, UBLOCK_VARIATION_SELECTORS = 108, UBLOCK_SUPPLEMENTARY_PRIVATE_USE_AREA_A = 109,
  UBLOCK_SUPPLEMENTARY_PRIVATE_USE_AREA_B = 110, UBLOCK_LIMBU = 111, UBLOCK_TAI_LE = 112, UBLOCK_KHMER_SYMBOLS = 113,
  UBLOCK_PHONETIC_EXTENSIONS = 114, UBLOCK_MISCELLANEOUS_SYMBOLS_AND_ARROWS = 115, UBLOCK_YIJING_HEXAGRAM_SYMBOLS = 116, UBLOCK_LINEAR_B_SYLLABARY = 117,
  UBLOCK_LINEAR_B_IDEOGRAMS = 118, UBLOCK_AEGEAN_NUMBERS = 119, UBLOCK_UGARITIC = 120, UBLOCK_SHAVIAN = 121,
  UBLOCK_OSMANYA = 122, UBLOCK_CYPRIOT_SYLLABARY = 123, UBLOCK_TAI_XUAN_JING_SYMBOLS = 124, UBLOCK_VARIATION_SELECTORS_SUPPLEMENT = 125,
  UBLOCK_ANCIENT_GREEK_MUSICAL_NOTATION = 126, UBLOCK_ANCIENT_GREEK_NUMBERS = 127, UBLOCK_ARABIC_SUPPLEMENT = 128, UBLOCK_BUGINESE = 129,
  UBLOCK_CJK_STROKES = 130, UBLOCK_COMBINING_DIACRITICAL_MARKS_SUPPLEMENT = 131, UBLOCK_COPTIC = 132, UBLOCK_ETHIOPIC_EXTENDED = 133,
  UBLOCK_ETHIOPIC_SUPPLEMENT = 134, UBLOCK_GEORGIAN_SUPPLEMENT = 135, UBLOCK_GLAGOLITIC = 136, UBLOCK_KHAROSHTHI = 137,
  UBLOCK_MODIFIER_TONE_LETTERS = 138, UBLOCK_NEW_TAI_LUE = 139, UBLOCK_OLD_PERSIAN = 140, UBLOCK_PHONETIC_EXTENSIONS_SUPPLEMENT = 141,
  UBLOCK_SUPPLEMENTAL_PUNCTUATION = 142, UBLOCK_SYLOTI_NAGRI = 143, UBLOCK_TIFINAGH = 144, UBLOCK_VERTICAL_FORMS = 145,
  UBLOCK_NKO = 146, UBLOCK_BALINESE = 147, UBLOCK_LATIN_EXTENDED_C = 148, UBLOCK_LATIN_EXTENDED_D = 149,
  UBLOCK_PHAGS_PA = 150, UBLOCK_PHOENICIAN = 151, UBLOCK_CUNEIFORM = 152, UBLOCK_CUNEIFORM_NUMBERS_AND_PUNCTUATION = 153,
  UBLOCK_COUNTING_ROD_NUMERALS = 154, UBLOCK_SUNDANESE = 155, UBLOCK_LEPCHA = 156, UBLOCK_OL_CHIKI = 157,
  UBLOCK_CYRILLIC_EXTENDED_A = 158, UBLOCK_VAI = 159, UBLOCK_CYRILLIC_EXTENDED_B = 160, UBLOCK_SAURASHTRA = 161,
  UBLOCK_KAYAH_LI = 162, UBLOCK_REJANG = 163, UBLOCK_CHAM = 164, UBLOCK_ANCIENT_SYMBOLS = 165,
  UBLOCK_PHAISTOS_DISC = 166, UBLOCK_LYCIAN = 167, UBLOCK_CARIAN = 168, UBLOCK_LYDIAN = 169,
  UBLOCK_MAHJONG_TILES = 170, UBLOCK_DOMINO_TILES = 171, UBLOCK_SAMARITAN = 172, UBLOCK_UNIFIED_CANADIAN_ABORIGINAL_SYLLABICS_EXTENDED = 173,
  UBLOCK_TAI_THAM = 174, UBLOCK_VEDIC_EXTENSIONS = 175, UBLOCK_LISU = 176, UBLOCK_BAMUM = 177,
  UBLOCK_COMMON_INDIC_NUMBER_FORMS = 178, UBLOCK_DEVANAGARI_EXTENDED = 179, UBLOCK_HANGUL_JAMO_EXTENDED_A = 180, UBLOCK_JAVANESE = 181,
  UBLOCK_MYANMAR_EXTENDED_A = 182, UBLOCK_TAI_VIET = 183, UBLOCK_MEETEI_MAYEK = 184, UBLOCK_HANGUL_JAMO_EXTENDED_B = 185,
  UBLOCK_IMPERIAL_ARAMAIC = 186, UBLOCK_OLD_SOUTH_ARABIAN = 187, UBLOCK_AVESTAN = 188, UBLOCK_INSCRIPTIONAL_PARTHIAN = 189,
  UBLOCK_INSCRIPTIONAL_PAHLAVI = 190, UBLOCK_OLD_TURKIC = 191, UBLOCK_RUMI_NUMERAL_SYMBOLS = 192, UBLOCK_KAITHI = 193,
  UBLOCK_EGYPTIAN_HIEROGLYPHS = 194, UBLOCK_ENCLOSED_ALPHANUMERIC_SUPPLEMENT = 195, UBLOCK_ENCLOSED_IDEOGRAPHIC_SUPPLEMENT = 196, UBLOCK_CJK_UNIFIED_IDEOGRAPHS_EXTENSION_C = 197,
  UBLOCK_COUNT = 198, UBLOCK_INVALID_CODE = -1
}
 

Constants for Unicode blocks, see the Unicode Data file Blocks.txt.

More...
enum  UEastAsianWidth {
  U_EA_NEUTRAL, U_EA_AMBIGUOUS, U_EA_HALFWIDTH, U_EA_FULLWIDTH,
  U_EA_NARROW, U_EA_WIDE, U_EA_COUNT
}
 

East Asian Width constants.

More...
enum  UCharNameChoice {
  U_UNICODE_CHAR_NAME, U_UNICODE_10_CHAR_NAME, U_EXTENDED_CHAR_NAME, U_CHAR_NAME_ALIAS,
  U_CHAR_NAME_CHOICE_COUNT
}
 

Selector constants for u_charName().

More...
enum  UPropertyNameChoice { U_SHORT_PROPERTY_NAME, U_LONG_PROPERTY_NAME, U_PROPERTY_NAME_CHOICE_COUNT }
 

Selector constants for u_getPropertyName() and u_getPropertyValueName().

More...
enum  UDecompositionType {
  U_DT_NONE, U_DT_CANONICAL, U_DT_COMPAT, U_DT_CIRCLE,
  U_DT_FINAL, U_DT_FONT, U_DT_FRACTION, U_DT_INITIAL,
  U_DT_ISOLATED, U_DT_MEDIAL, U_DT_NARROW, U_DT_NOBREAK,
  U_DT_SMALL, U_DT_SQUARE, U_DT_SUB, U_DT_SUPER,
  U_DT_VERTICAL, U_DT_WIDE, U_DT_COUNT
}
 

Decomposition Type constants.

More...
enum  UJoiningType {
  U_JT_NON_JOINING, U_JT_JOIN_CAUSING, U_JT_DUAL_JOINING, U_JT_LEFT_JOINING,
  U_JT_RIGHT_JOINING, U_JT_TRANSPARENT, U_JT_COUNT
}
 

Joining Type constants.

More...
enum  UJoiningGroup {
  U_JG_NO_JOINING_GROUP, U_JG_AIN, U_JG_ALAPH, U_JG_ALEF,
  U_JG_BEH, U_JG_BETH, U_JG_DAL, U_JG_DALATH_RISH,
  U_JG_E, U_JG_FEH, U_JG_FINAL_SEMKATH, U_JG_GAF,
  U_JG_GAMAL, U_JG_HAH, U_JG_HAMZA_ON_HEH_GOAL, U_JG_HE,
  U_JG_HEH, U_JG_HEH_GOAL, U_JG_HETH, U_JG_KAF,
  U_JG_KAPH, U_JG_KNOTTED_HEH, U_JG_LAM, U_JG_LAMADH,
  U_JG_MEEM, U_JG_MIM, U_JG_NOON, U_JG_NUN,
  U_JG_PE, U_JG_QAF, U_JG_QAPH, U_JG_REH,
  U_JG_REVERSED_PE, U_JG_SAD, U_JG_SADHE, U_JG_SEEN,
  U_JG_SEMKATH, U_JG_SHIN, U_JG_SWASH_KAF, U_JG_SYRIAC_WAW,
  U_JG_TAH, U_JG_TAW, U_JG_TEH_MARBUTA, U_JG_TETH,
  U_JG_WAW, U_JG_YEH, U_JG_YEH_BARREE, U_JG_YEH_WITH_TAIL,
  U_JG_YUDH, U_JG_YUDH_HE, U_JG_ZAIN, U_JG_FE,
  U_JG_KHAPH, U_JG_ZHAIN, U_JG_BURUSHASKI_YEH_BARREE, U_JG_FARSI_YEH,
  U_JG_NYA, U_JG_COUNT
}
 

Joining Group constants.

More...
enum  UGraphemeClusterBreak {
  U_GCB_OTHER = 0, U_GCB_CONTROL = 1, U_GCB_CR = 2, U_GCB_EXTEND = 3,
  U_GCB_L = 4, U_GCB_LF = 5, U_GCB_LV = 6, U_GCB_LVT = 7,
  U_GCB_T = 8, U_GCB_V = 9, U_GCB_SPACING_MARK = 10, U_GCB_PREPEND = 11,
  U_GCB_COUNT = 12
}
 

Grapheme Cluster Break constants.

More...
enum  UWordBreakValues {
  U_WB_OTHER = 0, U_WB_ALETTER = 1, U_WB_FORMAT = 2, U_WB_KATAKANA = 3,
  U_WB_MIDLETTER = 4, U_WB_MIDNUM = 5, U_WB_NUMERIC = 6, U_WB_EXTENDNUMLET = 7,
  U_WB_CR = 8, U_WB_EXTEND = 9, U_WB_LF = 10, U_WB_MIDNUMLET = 11,
  U_WB_NEWLINE = 12, U_WB_COUNT = 13
}
 

Word Break constants.

More...
enum  USentenceBreak {
  U_SB_OTHER = 0, U_SB_ATERM = 1, U_SB_CLOSE = 2, U_SB_FORMAT = 3,
  U_SB_LOWER = 4, U_SB_NUMERIC = 5, U_SB_OLETTER = 6, U_SB_SEP = 7,
  U_SB_SP = 8, U_SB_STERM = 9, U_SB_UPPER = 10, U_SB_CR = 11,
  U_SB_EXTEND = 12, U_SB_LF = 13, U_SB_SCONTINUE = 14, U_SB_COUNT = 15
}
 

Sentence Break constants.

More...
enum  ULineBreak {
  U_LB_UNKNOWN = 0, U_LB_AMBIGUOUS = 1, U_LB_ALPHABETIC = 2, U_LB_BREAK_BOTH = 3,
  U_LB_BREAK_AFTER = 4, U_LB_BREAK_BEFORE = 5, U_LB_MANDATORY_BREAK = 6, U_LB_CONTINGENT_BREAK = 7,
  U_LB_CLOSE_PUNCTUATION = 8, U_LB_COMBINING_MARK = 9, U_LB_CARRIAGE_RETURN = 10, U_LB_EXCLAMATION = 11,
  U_LB_GLUE = 12, U_LB_HYPHEN = 13, U_LB_IDEOGRAPHIC = 14, U_LB_INSEPERABLE = 15,
  U_LB_INSEPARABLE = U_LB_INSEPERABLE, U_LB_INFIX_NUMERIC = 16, U_LB_LINE_FEED = 17, U_LB_NONSTARTER = 18,
  U_LB_NUMERIC = 19, U_LB_OPEN_PUNCTUATION = 20, U_LB_POSTFIX_NUMERIC = 21, U_LB_PREFIX_NUMERIC = 22,
  U_LB_QUOTATION = 23, U_LB_COMPLEX_CONTEXT = 24, U_LB_SURROGATE = 25, U_LB_SPACE = 26,
  U_LB_BREAK_SYMBOLS = 27, U_LB_ZWSPACE = 28, U_LB_NEXT_LINE = 29, U_LB_WORD_JOINER = 30,
  U_LB_H2 = 31, U_LB_H3 = 32, U_LB_JL = 33, U_LB_JT = 34,
  U_LB_JV = 35, U_LB_CLOSE_PARENTHESIS = 36, U_LB_COUNT = 37
}
 

Line Break constants.

More...
enum  UNumericType {
  U_NT_NONE, U_NT_DECIMAL, U_NT_DIGIT, U_NT_NUMERIC,
  U_NT_COUNT
}
 

Numeric Type constants.

More...
enum  UHangulSyllableType {
  U_HST_NOT_APPLICABLE, U_HST_LEADING_JAMO, U_HST_VOWEL_JAMO, U_HST_TRAILING_JAMO,
  U_HST_LV_SYLLABLE, U_HST_LVT_SYLLABLE, U_HST_COUNT
}
 

Hangul Syllable Type constants.

More...

Functions

UBool u_hasBinaryProperty (UChar32 c, UProperty which)
 Check a binary Unicode property for a code point.
UBool u_isUAlphabetic (UChar32 c)
 Check if a code point has the Alphabetic Unicode property.
UBool u_isULowercase (UChar32 c)
 Check if a code point has the Lowercase Unicode property.
UBool u_isUUppercase (UChar32 c)
 Check if a code point has the Uppercase Unicode property.
UBool u_isUWhiteSpace (UChar32 c)
 Check if a code point has the White_Space Unicode property.
int32_t u_getIntPropertyValue (UChar32 c, UProperty which)
 Get the property value for an enumerated or integer Unicode property for a code point.
int32_t u_getIntPropertyMinValue (UProperty which)
 Get the minimum value for an enumerated/integer/binary Unicode property.
int32_t u_getIntPropertyMaxValue (UProperty which)
 Get the maximum value for an enumerated/integer/binary Unicode property.
double u_getNumericValue (UChar32 c)
 Get the numeric value for a Unicode code point as defined in the Unicode Character Database.
UBool u_islower (UChar32 c)
 Determines whether the specified code point has the general category "Ll" (lowercase letter).
UBool u_isupper (UChar32 c)
 Determines whether the specified code point has the general category "Lu" (uppercase letter).
UBool u_istitle (UChar32 c)
 Determines whether the specified code point is a titlecase letter.
UBool u_isdigit (UChar32 c)
 Determines whether the specified code point is a digit character according to Java.
UBool u_isalpha (UChar32 c)
 Determines whether the specified code point is a letter character.
UBool u_isalnum (UChar32 c)
 Determines whether the specified code point is an alphanumeric character (letter or digit) according to Java.
UBool u_isxdigit (UChar32 c)
 Determines whether the specified code point is a hexadecimal digit.
UBool u_ispunct (UChar32 c)
 Determines whether the specified code point is a punctuation character.
UBool u_isgraph (UChar32 c)
 Determines whether the specified code point is a "graphic" character (printable, excluding spaces).
UBool u_isblank (UChar32 c)
 Determines whether the specified code point is a "blank" or "horizontal space", a character that visibly separates words on a line.
UBool u_isdefined (UChar32 c)
 Determines whether the specified code point is "defined", which usually means that it is assigned a character.
UBool u_isspace (UChar32 c)
 Determines if the specified character is a space character or not.
UBool u_isJavaSpaceChar (UChar32 c)
 Determine if the specified code point is a space character according to Java.
UBool u_isWhitespace (UChar32 c)
 Determines if the specified code point is a whitespace character according to Java/ICU.
UBool u_iscntrl (UChar32 c)
 Determines whether the specified code point is a control character (as defined by this function).
UBool u_isISOControl (UChar32 c)
 Determines whether the specified code point is an ISO control code.
UBool u_isprint (UChar32 c)
 Determines whether the specified code point is a printable character.
UBool u_isbase (UChar32 c)
 Determines whether the specified code point is a base character.
UCharDirection u_charDirection (UChar32 c)
 Returns the bidirectional category value for the code point, which is used in the Unicode bidirectional algorithm (UAX #9 http://www.unicode.org/reports/tr9/).
UBool u_isMirrored (UChar32 c)
 Determines whether the code point has the Bidi_Mirrored property.
UChar32 u_charMirror (UChar32 c)
 Maps the specified character to a "mirror-image" character.
int8_t u_charType (UChar32 c)
 Returns the general category value for the code point.
void u_enumCharTypes (UCharEnumTypeRange *enumRange, const void *context)
 Enumerate efficiently all code points with their Unicode general categories.
uint8_t u_getCombiningClass (UChar32 c)
 Returns the combining class of the code point as specified in UnicodeData.txt.
int32_t u_charDigitValue (UChar32 c)
 Returns the decimal digit value of a decimal digit character.
UBlockCode ublock_getCode (UChar32 c)
 Returns the Unicode allocation block that contains the character.
int32_t u_charName (UChar32 code, UCharNameChoice nameChoice, char *buffer, int32_t bufferLength, UErrorCode *pErrorCode)
 Retrieve the name of a Unicode character.
int32_t u_getISOComment (UChar32 c, char *dest, int32_t destCapacity, UErrorCode *pErrorCode)
 Get the ISO 10646 comment for a character.
UChar32 u_charFromName (UCharNameChoice nameChoice, const char *name, UErrorCode *pErrorCode)
 Find a Unicode character by its name and return its code point value.
void u_enumCharNames (UChar32 start, UChar32 limit, UEnumCharNamesFn *fn, void *context, UCharNameChoice nameChoice, UErrorCode *pErrorCode)
 Enumerate all assigned Unicode characters between the start and limit code points (start inclusive, limit exclusive) and call a function for each, passing the code point value and the character name.
const char * u_getPropertyName (UProperty property, UPropertyNameChoice nameChoice)
 Return the Unicode name for a given property, as given in the Unicode database file PropertyAliases.txt.
UProperty u_getPropertyEnum (const char *alias)
 Return the UProperty enum for a given property name, as specified in the Unicode database file PropertyAliases.txt.
const char * u_getPropertyValueName (UProperty property, int32_t value, UPropertyNameChoice nameChoice)
 Return the Unicode name for a given property value, as given in the Unicode database file PropertyValueAliases.txt.
int32_t u_getPropertyValueEnum (UProperty property, const char *alias)
 Return the property value integer for a given value name, as specified in the Unicode database file PropertyValueAliases.txt.
UBool u_isIDStart (UChar32 c)
 Determines if the specified character is permissible as the first character in an identifier according to Unicode (The Unicode Standard, Version 3.0, chapter 5.16 Identifiers).
UBool u_isIDPart (UChar32 c)
 Determines if the specified character is permissible in an identifier according to Java.
UBool u_isIDIgnorable (UChar32 c)
 Determines if the specified character should be regarded as an ignorable character in an identifier, according to Java.
UBool u_isJavaIDStart (UChar32 c)
 Determines if the specified character is permissible as the first character in a Java identifier.
UBool u_isJavaIDPart (UChar32 c)
 Determines if the specified character is permissible in a Java identifier.
UChar32 u_tolower (UChar32 c)
 The given character is mapped to its lowercase equivalent according to UnicodeData.txt; if the character has no lowercase equivalent, the character itself is returned.
UChar32 u_toupper (UChar32 c)
 The given character is mapped to its uppercase equivalent according to UnicodeData.txt; if the character has no uppercase equivalent, the character itself is returned.
UChar32 u_totitle (UChar32 c)
 The given character is mapped to its titlecase equivalent according to UnicodeData.txt; if none is defined, the character itself is returned.
UChar32 u_foldCase (UChar32 c, uint32_t options)
 The given character is mapped to its case folding equivalent according to UnicodeData.txt and CaseFolding.txt; if the character has no case folding equivalent, the character itself is returned.
int32_t u_digit (UChar32 ch, int8_t radix)
 Returns the decimal digit value of the code point in the specified radix.
UChar32 u_forDigit (int32_t digit, int8_t radix)
 Determines the character representation for a specific digit in the specified radix.
void u_charAge (UChar32 c, UVersionInfo versionArray)
 Get the "age" of the code point.
void u_getUnicodeVersion (UVersionInfo versionArray)
 Gets the Unicode version information.
int32_t u_getFC_NFKC_Closure (UChar32 c, UChar *dest, int32_t destCapacity, UErrorCode *pErrorCode)
 Get the FC_NFKC_Closure property string for a character.

Detailed Description

C API: Unicode Properties.

This C API provides low-level access to the Unicode Character Database. In addition to raw property values, some convenience functions calculate derived properties, for example for Java-style programming.

Unicode assigns each code point (not just assigned character) values for many properties. Most of them are simple boolean flags, or constants from a small enumerated list. For some properties, values are strings or other relatively more complex types.

For more information see "About the Unicode Character Database" (http://www.unicode.org/ucd/) and the ICU User Guide chapter on Properties (http://icu-project.org/userguide/properties.html).

Many functions are designed to match java.lang.Character functions. See the individual function documentation, and see the JDK 1.4 java.lang.Character documentation at http://java.sun.com/j2se/1.4/docs/api/java/lang/Character.html

There are also functions that provide easy migration from C/POSIX functions like isblank(). Their use is generally discouraged because the C/POSIX standards do not define their semantics beyond the ASCII range, which means that different implementations exhibit very different behavior. Instead, Unicode properties should be used directly.

There are also only a few, broad C/POSIX character classes, and they tend to be used for conflicting purposes. For example, the "isalpha()" class is sometimes used to determine word boundaries, while a more sophisticated approach would at least distinguish initial letters from continuation characters (the latter including combining marks). (In ICU, BreakIterator is the most sophisticated API for word boundaries.) Another example: There is no "istitle()" class for titlecase characters.

ICU 3.4 and later provides API access for all twelve C/POSIX character classes. ICU implements them according to the Standard Recommendations in Annex C: Compatibility Properties of UTS #18 Unicode Regular Expressions (http://www.unicode.org/reports/tr18/#Compatibility_Properties).

API access for C/POSIX character classes is as follows:

Note: Some of the u_isxyz() functions in uchar.h predate, and do not match, the Standard Recommendations in UTS #18. Instead, they match Java functions according to their API documentation.

The C/POSIX character classes are also available in UnicodeSet patterns, using patterns like [:graph:] or \p{graph}.

Note: There are several ICU whitespace functions. Comparison:

Definition in file uchar.h.


Define Documentation

#define U_FOLD_CASE_DEFAULT   0

Option value for case folding: use default mappings defined in CaseFolding.txt.

Stable:
ICU 2.0

Definition at line 2943 of file uchar.h.

#define U_FOLD_CASE_EXCLUDE_SPECIAL_I   1

Option value for case folding:.

Use the modified set of mappings provided in CaseFolding.txt to handle dotted I and dotless i appropriately for Turkic languages (tr, az).

Before Unicode 3.2, CaseFolding.txt contains mappings marked with 'I' that are to be included for default mappings and excluded for the Turkic-specific mappings.

Unicode 3.2 CaseFolding.txt instead contains mappings marked with 'T' that are to be excluded for default mappings and included for the Turkic-specific mappings.

Stable:
ICU 2.0

Definition at line 2961 of file uchar.h.

#define U_GC_C_MASK   (U_GC_CN_MASK|U_GC_CC_MASK|U_GC_CF_MASK|U_GC_CO_MASK|U_GC_CS_MASK)

Mask constant for multiple UCharCategory bits (C Others).

Stable:
ICU 2.1

Definition at line 743 of file uchar.h.

#define U_GC_CC_MASK   U_MASK(U_CONTROL_CHAR)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 691 of file uchar.h.

#define U_GC_CF_MASK   U_MASK(U_FORMAT_CHAR)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 693 of file uchar.h.

#define U_GC_CN_MASK   U_MASK(U_GENERAL_OTHER_TYPES)

U_GC_XX_MASK constants are bit flags corresponding to Unicode general category values.

For each category, the nth bit is set if the numeric value of the corresponding UCharCategory constant is n.

There are also some U_GC_Y_MASK constants for groups of general categories like L for all letter categories.

See also:
u_charType
U_GET_GC_MASK
UCharCategory
Stable:
ICU 2.1

Definition at line 656 of file uchar.h.

#define U_GC_CO_MASK   U_MASK(U_PRIVATE_USE_CHAR)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 695 of file uchar.h.

#define U_GC_CS_MASK   U_MASK(U_SURROGATE)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 697 of file uchar.h.

#define U_GC_L_MASK   (U_GC_LU_MASK|U_GC_LL_MASK|U_GC_LT_MASK|U_GC_LM_MASK|U_GC_LO_MASK)

Mask constant for multiple UCharCategory bits (L Letters).

Stable:
ICU 2.1

Definition at line 726 of file uchar.h.

#define U_GC_LC_MASK   (U_GC_LU_MASK|U_GC_LL_MASK|U_GC_LT_MASK)

Mask constant for multiple UCharCategory bits (LC Cased Letters).

Stable:
ICU 2.1

Definition at line 730 of file uchar.h.

#define U_GC_LL_MASK   U_MASK(U_LOWERCASE_LETTER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 661 of file uchar.h.

#define U_GC_LM_MASK   U_MASK(U_MODIFIER_LETTER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 665 of file uchar.h.

#define U_GC_LO_MASK   U_MASK(U_OTHER_LETTER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 667 of file uchar.h.

#define U_GC_LT_MASK   U_MASK(U_TITLECASE_LETTER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 663 of file uchar.h.

#define U_GC_LU_MASK   U_MASK(U_UPPERCASE_LETTER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 659 of file uchar.h.

#define U_GC_M_MASK   (U_GC_MN_MASK|U_GC_ME_MASK|U_GC_MC_MASK)

Mask constant for multiple UCharCategory bits (M Marks).

Stable:
ICU 2.1

Definition at line 734 of file uchar.h.

#define U_GC_MC_MASK   U_MASK(U_COMBINING_SPACING_MARK)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 674 of file uchar.h.

#define U_GC_ME_MASK   U_MASK(U_ENCLOSING_MARK)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 672 of file uchar.h.

#define U_GC_MN_MASK   U_MASK(U_NON_SPACING_MARK)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 670 of file uchar.h.

#define U_GC_N_MASK   (U_GC_ND_MASK|U_GC_NL_MASK|U_GC_NO_MASK)

Mask constant for multiple UCharCategory bits (N Numbers).

Stable:
ICU 2.1

Definition at line 737 of file uchar.h.

#define U_GC_ND_MASK   U_MASK(U_DECIMAL_DIGIT_NUMBER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 677 of file uchar.h.

#define U_GC_NL_MASK   U_MASK(U_LETTER_NUMBER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 679 of file uchar.h.

#define U_GC_NO_MASK   U_MASK(U_OTHER_NUMBER)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 681 of file uchar.h.

#define U_GC_P_MASK
Value:

Mask constant for multiple UCharCategory bits (P Punctuation).

Stable:
ICU 2.1

Definition at line 747 of file uchar.h.

#define U_GC_PC_MASK   U_MASK(U_CONNECTOR_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 706 of file uchar.h.

#define U_GC_PD_MASK   U_MASK(U_DASH_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 700 of file uchar.h.

#define U_GC_PE_MASK   U_MASK(U_END_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 704 of file uchar.h.

#define U_GC_PF_MASK   U_MASK(U_FINAL_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 722 of file uchar.h.

#define U_GC_PI_MASK   U_MASK(U_INITIAL_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 720 of file uchar.h.

#define U_GC_PO_MASK   U_MASK(U_OTHER_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 708 of file uchar.h.

#define U_GC_PS_MASK   U_MASK(U_START_PUNCTUATION)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 702 of file uchar.h.

#define U_GC_S_MASK   (U_GC_SM_MASK|U_GC_SC_MASK|U_GC_SK_MASK|U_GC_SO_MASK)

Mask constant for multiple UCharCategory bits (S Symbols).

Stable:
ICU 2.1

Definition at line 752 of file uchar.h.

#define U_GC_SC_MASK   U_MASK(U_CURRENCY_SYMBOL)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 713 of file uchar.h.

#define U_GC_SK_MASK   U_MASK(U_MODIFIER_SYMBOL)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 715 of file uchar.h.

#define U_GC_SM_MASK   U_MASK(U_MATH_SYMBOL)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 711 of file uchar.h.

#define U_GC_SO_MASK   U_MASK(U_OTHER_SYMBOL)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 717 of file uchar.h.

#define U_GC_Z_MASK   (U_GC_ZS_MASK|U_GC_ZL_MASK|U_GC_ZP_MASK)

Mask constant for multiple UCharCategory bits (Z Separators).

Stable:
ICU 2.1

Definition at line 740 of file uchar.h.

#define U_GC_ZL_MASK   U_MASK(U_LINE_SEPARATOR)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 686 of file uchar.h.

#define U_GC_ZP_MASK   U_MASK(U_PARAGRAPH_SEPARATOR)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 688 of file uchar.h.

#define U_GC_ZS_MASK   U_MASK(U_SPACE_SEPARATOR)

Mask constant for a UCharCategory.

Stable:
ICU 2.1

Definition at line 684 of file uchar.h.

#define U_GET_GC_MASK (  )     U_MASK(u_charType(c))

Get a single-bit bit set for the general category of a character.

This bit set can be compared bitwise with U_GC_SM_MASK, U_GC_L_MASK, etc. Same as U_MASK(u_charType(c)).

Parameters:
c the code point to be tested
Returns:
a single-bit mask corresponding to the general category (UCharCategory) value
See also:
u_charType
UCharCategory
U_GC_CN_MASK
Stable:
ICU 2.1

Definition at line 2375 of file uchar.h.

#define U_MASK (  )     ((uint32_t)1<<(x))

Get a single-bit bit set (a flag) from a bit number 0..31.

Stable:
ICU 2.1

Definition at line 140 of file uchar.h.

#define U_NO_NUMERIC_VALUE   ((double)-123456789.)

Special value that is returned by u_getNumericValue when no numeric value is defined for a code point.

See also:
u_getNumericValue
Stable:
ICU 2.2

Definition at line 1888 of file uchar.h.

#define U_UNICODE_VERSION   "5.2"

Unicode version number, default for the current ICU version.

The actual Unicode Character Database (UCD) data is stored in uprops.dat and may be generated from UCD files from a different Unicode version. Call u_getUnicodeVersion to get the actual Unicode version of the data.

See also:
u_getUnicodeVersion
Stable:
ICU 2.0

Definition at line 42 of file uchar.h.

#define UCHAR_MAX_VALUE   0x10ffff

The highest Unicode code point value (scalar value) according to The Unicode Standard.

This is a 21-bit value (20.1 bits, rounded up). For a single character, UChar32 is a simple type that can hold any code point value.

See also:
UChar32
Stable:
ICU 2.0

Definition at line 134 of file uchar.h.

#define UCHAR_MIN_VALUE   0

Constants.

The lowest Unicode code point value. Code points are non-negative.

Stable:
ICU 2.0

Definition at line 124 of file uchar.h.


Typedef Documentation

typedef enum UBlockCode UBlockCode
Stable:
ICU 2.0

Definition at line 1351 of file uchar.h.

typedef UBool UCharEnumTypeRange(const void *context, UChar32 start, UChar32 limit, UCharCategory type)

Callback from u_enumCharTypes(), is called for each contiguous range of code points c (where start<=c<limit) with the same Unicode general category ("character type").

The callback function can stop the enumeration by returning FALSE.

Parameters:
context an opaque pointer, as passed into utrie_enum()
start the first code point in a contiguous range with value
limit one past the last code point in a contiguous range with value
type the general category for all code points in [start..limit[
Returns:
FALSE to stop the enumeration
Stable:
ICU 2.1
See also:
UCharCategory
u_enumCharTypes

Definition at line 2395 of file uchar.h.

typedef UBool UEnumCharNamesFn(void *context, UChar32 code, UCharNameChoice nameChoice, const char *name, int32_t length)

Type of a callback function for u_enumCharNames() that gets called for each Unicode character with the code point value and the character name.

If such a function returns FALSE, then the enumeration is stopped.

Parameters:
context The context pointer that was passed to u_enumCharNames().
code The Unicode code point for the character with this name.
nameChoice Selector for which kind of names is enumerated.
name The character's name, zero-terminated.
length The length of the name.
Returns:
TRUE if the enumeration should continue, FALSE to stop it.
See also:
UCharNameChoice
u_enumCharNames
Stable:
ICU 1.7

Definition at line 2580 of file uchar.h.


Enumeration Type Documentation

enum UBlockCode

Constants for Unicode blocks, see the Unicode Data file Blocks.txt.

Stable:
ICU 2.0
Enumerator:
UBLOCK_NO_BLOCK 

New No_Block value in Unicode 4.

Stable:
ICU 2.6
UBLOCK_BASIC_LATIN 
Stable:
ICU 2.0
UBLOCK_LATIN_1_SUPPLEMENT 
Stable:
ICU 2.0
UBLOCK_LATIN_EXTENDED_A 
Stable:
ICU 2.0
UBLOCK_LATIN_EXTENDED_B 
Stable:
ICU 2.0
UBLOCK_IPA_EXTENSIONS 
Stable:
ICU 2.0
UBLOCK_SPACING_MODIFIER_LETTERS 
Stable:
ICU 2.0
UBLOCK_COMBINING_DIACRITICAL_MARKS 
Stable:
ICU 2.0
UBLOCK_GREEK 

Unicode 3.2 renames this block to "Greek and Coptic".

Stable:
ICU 2.0
UBLOCK_CYRILLIC 
Stable:
ICU 2.0
UBLOCK_ARMENIAN 
Stable:
ICU 2.0
UBLOCK_HEBREW 
Stable:
ICU 2.0
UBLOCK_ARABIC 
Stable:
ICU 2.0
UBLOCK_SYRIAC 
Stable:
ICU 2.0
UBLOCK_THAANA 
Stable:
ICU 2.0
UBLOCK_DEVANAGARI 
Stable:
ICU 2.0
UBLOCK_BENGALI 
Stable:
ICU 2.0
UBLOCK_GURMUKHI 
Stable:
ICU 2.0
UBLOCK_GUJARATI 
Stable:
ICU 2.0
UBLOCK_ORIYA 
Stable:
ICU 2.0
UBLOCK_TAMIL 
Stable:
ICU 2.0
UBLOCK_TELUGU 
Stable:
ICU 2.0
UBLOCK_KANNADA 
Stable:
ICU 2.0
UBLOCK_MALAYALAM 
Stable:
ICU 2.0
UBLOCK_SINHALA 
Stable:
ICU 2.0
UBLOCK_THAI 
Stable:
ICU 2.0
UBLOCK_LAO 
Stable:
ICU 2.0
UBLOCK_TIBETAN 
Stable:
ICU 2.0
UBLOCK_MYANMAR 
Stable:
ICU 2.0
UBLOCK_GEORGIAN 
Stable:
ICU 2.0
UBLOCK_HANGUL_JAMO 
Stable:
ICU 2.0
UBLOCK_ETHIOPIC 
Stable:
ICU 2.0
UBLOCK_CHEROKEE 
Stable:
ICU 2.0
UBLOCK_UNIFIED_CANADIAN_ABORIGINAL_SYLLABICS 
Stable:
ICU 2.0
UBLOCK_OGHAM 
Stable:
ICU 2.0
UBLOCK_RUNIC 
Stable:
ICU 2.0
UBLOCK_KHMER 
Stable:
ICU 2.0
UBLOCK_MONGOLIAN 
Stable:
ICU 2.0
UBLOCK_LATIN_EXTENDED_ADDITIONAL 
Stable:
ICU 2.0
UBLOCK_GREEK_EXTENDED 
Stable:
ICU 2.0
UBLOCK_GENERAL_PUNCTUATION 
Stable:
ICU 2.0
UBLOCK_SUPERSCRIPTS_AND_SUBSCRIPTS 
Stable:
ICU 2.0
UBLOCK_CURRENCY_SYMBOLS 
Stable:
ICU 2.0
UBLOCK_COMBINING_MARKS_FOR_SYMBOLS 

Unicode 3.2 renames this block to "Combining Diacritical Marks for Symbols".

Stable:
ICU 2.0
UBLOCK_LETTERLIKE_SYMBOLS 
Stable:
ICU 2.0
UBLOCK_NUMBER_FORMS 
Stable:
ICU 2.0
UBLOCK_ARROWS 
Stable:
ICU 2.0
UBLOCK_MATHEMATICAL_OPERATORS 
Stable:
ICU 2.0
UBLOCK_MISCELLANEOUS_TECHNICAL 
Stable:
ICU 2.0
UBLOCK_CONTROL_PICTURES 
Stable:
ICU 2.0
UBLOCK_OPTICAL_CHARACTER_RECOGNITION 
Stable:
ICU 2.0
UBLOCK_ENCLOSED_ALPHANUMERICS 
Stable:
ICU 2.0
UBLOCK_BOX_DRAWING 
Stable:
ICU 2.0
UBLOCK_BLOCK_ELEMENTS 
Stable:
ICU 2.0
UBLOCK_GEOMETRIC_SHAPES 
Stable:
ICU 2.0
UBLOCK_MISCELLANEOUS_SYMBOLS 
Stable:
ICU 2.0
UBLOCK_DINGBATS 
Stable:
ICU 2.0
UBLOCK_BRAILLE_PATTERNS 
Stable:
ICU 2.0
UBLOCK_CJK_RADICALS_SUPPLEMENT 
Stable:
ICU 2.0
UBLOCK_KANGXI_RADICALS 
Stable:
ICU 2.0
UBLOCK_IDEOGRAPHIC_DESCRIPTION_CHARACTERS 
Stable:
ICU 2.0
UBLOCK_CJK_SYMBOLS_AND_PUNCTUATION 
Stable:
ICU 2.0
UBLOCK_HIRAGANA 
Stable:
ICU 2.0
UBLOCK_KATAKANA 
Stable:
ICU 2.0
UBLOCK_BOPOMOFO 
Stable:
ICU 2.0
UBLOCK_HANGUL_COMPATIBILITY_JAMO 
Stable:
ICU 2.0
UBLOCK_KANBUN 
Stable:
ICU 2.0
UBLOCK_BOPOMOFO_EXTENDED 
Stable:
ICU 2.0
UBLOCK_ENCLOSED_CJK_LETTERS_AND_MONTHS 
Stable:
ICU 2.0
UBLOCK_CJK_COMPATIBILITY 
Stable:
ICU 2.0
UBLOCK_CJK_UNIFIED_IDEOGRAPHS_EXTENSION_A 
Stable:
ICU 2.0
UBLOCK_CJK_UNIFIED_IDEOGRAPHS 
Stable:
ICU 2.0
UBLOCK_YI_SYLLABLES 
Stable:
ICU 2.0
UBLOCK_YI_RADICALS 
Stable:
ICU 2.0
UBLOCK_HANGUL_SYLLABLES 
Stable:
ICU 2.0
UBLOCK_HIGH_SURROGATES 
Stable:
ICU 2.0
UBLOCK_HIGH_PRIVATE_USE_SURROGATES 
Stable:
ICU 2.0
UBLOCK_LOW_SURROGATES 
Stable:
ICU 2.0
UBLOCK_PRIVATE_USE 

Same as UBLOCK_PRIVATE_USE_AREA.

Until Unicode 3.1.1, the corresponding block name was "Private Use", and multiple code point ranges had this block. Unicode 3.2 renames the block for the BMP PUA to "Private Use Area" and adds separate blocks for the supplementary PUAs.

Stable:
ICU 2.0
UBLOCK_PRIVATE_USE_AREA 

Same as UBLOCK_PRIVATE_USE.

Until Unicode 3.1.1, the corresponding block name was "Private Use", and multiple code point ranges had this block. Unicode 3.2 renames the block for the BMP PUA to "Private Use Area" and adds separate blocks for the supplementary PUAs.

Stable:
ICU 2.0
UBLOCK_CJK_COMPATIBILITY_IDEOGRAPHS 
Stable:
ICU 2.0
UBLOCK_ALPHABETIC_PRESENTATION_FORMS 
Stable:
ICU 2.0
UBLOCK_ARABIC_PRESENTATION_FORMS_A 
Stable:
ICU 2.0
UBLOCK_COMBINING_HALF_MARKS 
Stable:
ICU 2.0
UBLOCK_CJK_COMPATIBILITY_FORMS 
Stable:
ICU 2.0
UBLOCK_SMALL_FORM_VARIANTS 
Stable:
ICU 2.0
UBLOCK_ARABIC_PRESENTATION_FORMS_B 
Stable:
ICU 2.0
UBLOCK_SPECIALS 
Stable:
ICU 2.0
UBLOCK_HALFWIDTH_AND_FULLWIDTH_FORMS 
Stable:
ICU 2.0
UBLOCK_OLD_ITALIC 
Stable:
ICU 2.0
UBLOCK_GOTHIC 
Stable:
ICU 2.0
UBLOCK_DESERET 
Stable:
ICU 2.0
UBLOCK_BYZANTINE_MUSICAL_SYMBOLS 
Stable:
ICU 2.0
UBLOCK_MUSICAL_SYMBOLS 
Stable:
ICU 2.0
UBLOCK_MATHEMATICAL_ALPHANUMERIC_SYMBOLS 
Stable:
ICU 2.0
UBLOCK_CJK_UNIFIED_IDEOGRAPHS_EXTENSION_B 
Stable:
ICU 2.0
UBLOCK_CJK_COMPATIBILITY_IDEOGRAPHS_SUPPLEMENT 
Stable:
ICU 2.0
UBLOCK_TAGS 
Stable:
ICU 2.0
UBLOCK_CYRILLIC_SUPPLEMENTARY 

Unicode 4.0.1 renames the "Cyrillic Supplementary" block to "Cyrillic Supplement".

Stable:
ICU 2.2
UBLOCK_CYRILLIC_SUPPLEMENT 
Stable:
ICU 3.0
UBLOCK_TAGALOG 
Stable:
ICU 2.2
UBLOCK_HANUNOO 
Stable:
ICU 2.2
UBLOCK_BUHID 
Stable:
ICU 2.2
UBLOCK_TAGBANWA 
Stable:
ICU 2.2
UBLOCK_MISCELLANEOUS_MATHEMATICAL_SYMBOLS_A 
Stable:
ICU 2.2
UBLOCK_SUPPLEMENTAL_ARROWS_A 
Stable:
ICU 2.2
UBLOCK_SUPPLEMENTAL_ARROWS_B 
Stable:
ICU 2.2
UBLOCK_MISCELLANEOUS_MATHEMATICAL_SYMBOLS_B 
Stable:
ICU 2.2
UBLOCK_SUPPLEMENTAL_MATHEMATICAL_OPERATORS 
Stable:
ICU 2.2
UBLOCK_KATAKANA_PHONETIC_EXTENSIONS 
Stable:
ICU 2.2
UBLOCK_VARIATION_SELECTORS 
Stable:
ICU 2.2
UBLOCK_SUPPLEMENTARY_PRIVATE_USE_AREA_A 
Stable:
ICU 2.2
UBLOCK_SUPPLEMENTARY_PRIVATE_USE_AREA_B 
Stable:
ICU 2.2
UBLOCK_LIMBU 
Stable:
ICU 2.6
UBLOCK_TAI_LE 
Stable:
ICU 2.6
UBLOCK_KHMER_SYMBOLS 
Stable:
ICU 2.6
UBLOCK_PHONETIC_EXTENSIONS 
Stable:
ICU 2.6
UBLOCK_MISCELLANEOUS_SYMBOLS_AND_ARROWS 
Stable:
ICU 2.6
UBLOCK_YIJING_HEXAGRAM_SYMBOLS 
Stable:
ICU 2.6
UBLOCK_LINEAR_B_SYLLABARY 
Stable:
ICU 2.6
UBLOCK_LINEAR_B_IDEOGRAMS 
Stable:
ICU 2.6
UBLOCK_AEGEAN_NUMBERS 
Stable:
ICU 2.6
UBLOCK_UGARITIC 
Stable:
ICU 2.6
UBLOCK_SHAVIAN 
Stable:
ICU 2.6
UBLOCK_OSMANYA 
Stable:
ICU 2.6
UBLOCK_CYPRIOT_SYLLABARY 
Stable:
ICU 2.6
UBLOCK_TAI_XUAN_JING_SYMBOLS 
Stable:
ICU 2.6
UBLOCK_VARIATION_SELECTORS_SUPPLEMENT 
Stable:
ICU 2.6
UBLOCK_ANCIENT_GREEK_MUSICAL_NOTATION 
Stable:
ICU 3.4
UBLOCK_ANCIENT_GREEK_NUMBERS 
Stable:
ICU 3.4
UBLOCK_ARABIC_SUPPLEMENT 
Stable:
ICU 3.4
UBLOCK_BUGINESE 
Stable:
ICU 3.4
UBLOCK_CJK_STROKES 
Stable:
ICU 3.4
UBLOCK_COMBINING_DIACRITICAL_MARKS_SUPPLEMENT 
Stable:
ICU 3.4
UBLOCK_COPTIC 
Stable:
ICU 3.4
UBLOCK_ETHIOPIC_EXTENDED 
Stable:
ICU 3.4
UBLOCK_ETHIOPIC_SUPPLEMENT 
Stable:
ICU 3.4
UBLOCK_GEORGIAN_SUPPLEMENT 
Stable:
ICU 3.4
UBLOCK_GLAGOLITIC 
Stable:
ICU 3.4
UBLOCK_KHAROSHTHI 
Stable:
ICU 3.4
UBLOCK_MODIFIER_TONE_LETTERS 
Stable:
ICU 3.4
UBLOCK_NEW_TAI_LUE 
Stable:
ICU 3.4
UBLOCK_OLD_PERSIAN 
Stable:
ICU 3.4
UBLOCK_PHONETIC_EXTENSIONS_SUPPLEMENT 
Stable:
ICU 3.4
UBLOCK_SUPPLEMENTAL_PUNCTUATION 
Stable:
ICU 3.4
UBLOCK_SYLOTI_NAGRI 
Stable:
ICU 3.4
UBLOCK_TIFINAGH 
Stable:
ICU 3.4
UBLOCK_VERTICAL_FORMS 
Stable:
ICU 3.4
UBLOCK_NKO 
Stable:
ICU 3.6
UBLOCK_BALINESE 
Stable:
ICU 3.6
UBLOCK_LATIN_EXTENDED_C 
Stable:
ICU 3.6
UBLOCK_LATIN_EXTENDED_D 
Stable:
ICU 3.6
UBLOCK_PHAGS_PA 
Stable:
ICU 3.6
UBLOCK_PHOENICIAN 
Stable:
ICU 3.6
UBLOCK_CUNEIFORM 
Stable:
ICU 3.6
UBLOCK_CUNEIFORM_NUMBERS_AND_PUNCTUATION 
Stable:
ICU 3.6
UBLOCK_COUNTING_ROD_NUMERALS 
Stable:
ICU 3.6
UBLOCK_SUNDANESE 
Stable:
ICU 4.0
UBLOCK_LEPCHA 
Stable:
ICU 4.0
UBLOCK_OL_CHIKI 
Stable:
ICU 4.0
UBLOCK_CYRILLIC_EXTENDED_A 
Stable:
ICU 4.0
UBLOCK_VAI 
Stable:
ICU 4.0
UBLOCK_CYRILLIC_EXTENDED_B 
Stable:
ICU 4.0
UBLOCK_SAURASHTRA 
Stable:
ICU 4.0
UBLOCK_KAYAH_LI 
Stable:
ICU 4.0
UBLOCK_REJANG 
Stable:
ICU 4.0
UBLOCK_CHAM 
Stable:
ICU 4.0
UBLOCK_ANCIENT_SYMBOLS 
Stable:
ICU 4.0
UBLOCK_PHAISTOS_DISC 
Stable:
ICU 4.0
UBLOCK_LYCIAN 
Stable:
ICU 4.0
UBLOCK_CARIAN 
Stable:
ICU 4.0
UBLOCK_LYDIAN 
Stable:
ICU 4.0
UBLOCK_MAHJONG_TILES 
Stable:
ICU 4.0
UBLOCK_DOMINO_TILES 
Stable:
ICU 4.0
UBLOCK_SAMARITAN 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_UNIFIED_CANADIAN_ABORIGINAL_SYLLABICS_EXTENDED 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_TAI_THAM 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_VEDIC_EXTENSIONS 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_LISU 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_BAMUM 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_COMMON_INDIC_NUMBER_FORMS 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_DEVANAGARI_EXTENDED 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_HANGUL_JAMO_EXTENDED_A 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_JAVANESE 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_MYANMAR_EXTENDED_A 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_TAI_VIET 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_MEETEI_MAYEK 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_HANGUL_JAMO_EXTENDED_B 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_IMPERIAL_ARAMAIC 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_OLD_SOUTH_ARABIAN 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_AVESTAN 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_INSCRIPTIONAL_PARTHIAN 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_INSCRIPTIONAL_PAHLAVI 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_OLD_TURKIC 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_RUMI_NUMERAL_SYMBOLS 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_KAITHI 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_EGYPTIAN_HIEROGLYPHS 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_ENCLOSED_ALPHANUMERIC_SUPPLEMENT 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_ENCLOSED_IDEOGRAPHIC_SUPPLEMENT 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_CJK_UNIFIED_IDEOGRAPHS_EXTENSION_C 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UBLOCK_COUNT 
Stable:
ICU 2.0
UBLOCK_INVALID_CODE 
Stable:
ICU 2.0

Definition at line 807 of file uchar.h.

Data for enumerated Unicode general category types.

See http://www.unicode.org/Public/UNIDATA/UnicodeData.html .

Stable:
ICU 2.0
Enumerator:
U_UNASSIGNED 

See note !!.

Comments of the form "Cn" are read by genpname. Non-category for unassigned and non-character code points.

Stable:
ICU 2.0
U_GENERAL_OTHER_TYPES 

Cn "Other, Not Assigned (no characters in [UnicodeData.txt] have this property)" (same as U_UNASSIGNED!).

Stable:
ICU 2.0
U_UPPERCASE_LETTER 

Lu.

Stable:
ICU 2.0
U_LOWERCASE_LETTER 

Ll.

Stable:
ICU 2.0
U_TITLECASE_LETTER 

Lt.

Stable:
ICU 2.0
U_MODIFIER_LETTER 

Lm.

Stable:
ICU 2.0
U_OTHER_LETTER 

Lo.

Stable:
ICU 2.0
U_NON_SPACING_MARK 

Mn.

Stable:
ICU 2.0
U_ENCLOSING_MARK 

Me.

Stable:
ICU 2.0
U_COMBINING_SPACING_MARK 

Mc.

Stable:
ICU 2.0
U_DECIMAL_DIGIT_NUMBER 

Nd.

Stable:
ICU 2.0
U_LETTER_NUMBER 

Nl.

Stable:
ICU 2.0
U_OTHER_NUMBER 

No.

Stable:
ICU 2.0
U_SPACE_SEPARATOR 

Zs.

Stable:
ICU 2.0
U_LINE_SEPARATOR 

Zl.

Stable:
ICU 2.0
U_PARAGRAPH_SEPARATOR 

Zp.

Stable:
ICU 2.0
U_CONTROL_CHAR 

Cc.

Stable:
ICU 2.0
U_FORMAT_CHAR 

Cf.

Stable:
ICU 2.0
U_PRIVATE_USE_CHAR 

Co.

Stable:
ICU 2.0
U_SURROGATE 

Cs.

Stable:
ICU 2.0
U_DASH_PUNCTUATION 

Pd.

Stable:
ICU 2.0
U_START_PUNCTUATION 

Ps.

Stable:
ICU 2.0
U_END_PUNCTUATION 

Pe.

Stable:
ICU 2.0
U_CONNECTOR_PUNCTUATION 

Pc.

Stable:
ICU 2.0
U_OTHER_PUNCTUATION 

Po.

Stable:
ICU 2.0
U_MATH_SYMBOL 

Sm.

Stable:
ICU 2.0
U_CURRENCY_SYMBOL 

Sc.

Stable:
ICU 2.0
U_MODIFIER_SYMBOL 

Sk.

Stable:
ICU 2.0
U_OTHER_SYMBOL 

So.

Stable:
ICU 2.0
U_INITIAL_PUNCTUATION 

Pi.

Stable:
ICU 2.0
U_FINAL_PUNCTUATION 

Pf.

Stable:
ICU 2.0
U_CHAR_CATEGORY_COUNT 

One higher than the last enum UCharCategory constant.

Stable:
ICU 2.0

Definition at line 572 of file uchar.h.

This specifies the language directional property of a character set.

Stable:
ICU 2.0
Enumerator:
U_LEFT_TO_RIGHT 

See note !!.

Comments of the form "EN" are read by genpname. L

Stable:
ICU 2.0
U_RIGHT_TO_LEFT 

R.

Stable:
ICU 2.0
U_EUROPEAN_NUMBER 

EN.

Stable:
ICU 2.0
U_EUROPEAN_NUMBER_SEPARATOR 

ES.

Stable:
ICU 2.0
U_EUROPEAN_NUMBER_TERMINATOR 

ET.

Stable:
ICU 2.0
U_ARABIC_NUMBER 

AN.

Stable:
ICU 2.0
U_COMMON_NUMBER_SEPARATOR 

CS.

Stable:
ICU 2.0
U_BLOCK_SEPARATOR 

B.

Stable:
ICU 2.0
U_SEGMENT_SEPARATOR 

S.

Stable:
ICU 2.0
U_WHITE_SPACE_NEUTRAL 

WS.

Stable:
ICU 2.0
U_OTHER_NEUTRAL 

ON.

Stable:
ICU 2.0
U_LEFT_TO_RIGHT_EMBEDDING 

LRE.

Stable:
ICU 2.0
U_LEFT_TO_RIGHT_OVERRIDE 

LRO.

Stable:
ICU 2.0
U_RIGHT_TO_LEFT_ARABIC 

AL.

Stable:
ICU 2.0
U_RIGHT_TO_LEFT_EMBEDDING 

RLE.

Stable:
ICU 2.0
U_RIGHT_TO_LEFT_OVERRIDE 

RLO.

Stable:
ICU 2.0
U_POP_DIRECTIONAL_FORMAT 

PDF.

Stable:
ICU 2.0
U_DIR_NON_SPACING_MARK 

NSM.

Stable:
ICU 2.0
U_BOUNDARY_NEUTRAL 

BN.

Stable:
ICU 2.0
U_CHAR_DIRECTION_COUNT 
Stable:
ICU 2.0

Definition at line 758 of file uchar.h.

Selector constants for u_charName().

u_charName() returns the "modern" name of a Unicode character; or the name that was defined in Unicode version 1.0, before the Unicode standard merged with ISO-10646; or an "extended" name that gives each Unicode code point a unique name.

See also:
u_charName
Stable:
ICU 2.0
Enumerator:
U_CHAR_NAME_ALIAS 

Corrected name from NameAliases.txt.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4

Definition at line 1385 of file uchar.h.

Decomposition Type constants.

See also:
UCHAR_DECOMPOSITION_TYPE
Stable:
ICU 2.2

Definition at line 1418 of file uchar.h.

East Asian Width constants.

See also:
UCHAR_EAST_ASIAN_WIDTH
u_getIntPropertyValue
Stable:
ICU 2.2

Definition at line 1360 of file uchar.h.

Grapheme Cluster Break constants.

See also:
UCHAR_GRAPHEME_CLUSTER_BREAK
Stable:
ICU 3.4

Definition at line 1529 of file uchar.h.

Hangul Syllable Type constants.

See also:
UCHAR_HANGUL_SYLLABLE_TYPE
Stable:
ICU 2.6

Definition at line 1663 of file uchar.h.

Joining Group constants.

See also:
UCHAR_JOINING_GROUP
Stable:
ICU 2.2
Enumerator:
U_JG_FE 
Stable:
ICU 2.6
U_JG_KHAPH 
Stable:
ICU 2.6
U_JG_ZHAIN 
Stable:
ICU 2.6
U_JG_BURUSHASKI_YEH_BARREE 
Stable:
ICU 4.0
U_JG_FARSI_YEH 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
U_JG_NYA 
Draft:
This API may be changed in the future versions and was introduced in ICU 4.4

Definition at line 1462 of file uchar.h.

Joining Type constants.

See also:
UCHAR_JOINING_TYPE
Stable:
ICU 2.2

Definition at line 1446 of file uchar.h.

enum ULineBreak

Line Break constants.

See also:
UCHAR_LINE_BREAK
Stable:
ICU 2.2
Enumerator:
U_LB_INSEPARABLE 

Renamed from the misspelled "inseperable" in Unicode 4.0.1/ICU 3.0.

Stable:
ICU 3.0

Definition at line 1600 of file uchar.h.

Numeric Type constants.

See also:
UCHAR_NUMERIC_TYPE
Stable:
ICU 2.2

Definition at line 1649 of file uchar.h.

enum UProperty

Selection constants for Unicode properties.

These constants are used in functions like u_hasBinaryProperty to select one of the Unicode properties.

The properties APIs are intended to reflect Unicode properties as defined in the Unicode Character Database (UCD) and Unicode Technical Reports (UTR). For details about the properties see http://www.unicode.org/ucd/ . For names of Unicode properties see the UCD file PropertyAliases.txt.

Important: If ICU is built with UCD files from Unicode versions below, e.g., 3.2, then properties marked with "new in Unicode 3.2" are not or not fully available. Check u_getUnicodeVersion to be sure.

See also:
u_hasBinaryProperty
u_getIntPropertyValue
u_getUnicodeVersion
Stable:
ICU 2.1
Enumerator:
UCHAR_ALPHABETIC 

Binary property Alphabetic.

Same as u_isUAlphabetic, different from u_isalpha. Lu+Ll+Lt+Lm+Lo+Nl+Other_Alphabetic

Stable:
ICU 2.1
UCHAR_BINARY_START 

First constant for binary Unicode properties.

Stable:
ICU 2.1
UCHAR_ASCII_HEX_DIGIT 

Binary property ASCII_Hex_Digit.

0-9 A-F a-f

Stable:
ICU 2.1
UCHAR_BIDI_CONTROL 

Binary property Bidi_Control.

Format controls which have specific functions in the Bidi Algorithm.

Stable:
ICU 2.1
UCHAR_BIDI_MIRRORED 

Binary property Bidi_Mirrored.

Characters that may change display in RTL text. Same as u_isMirrored. See Bidi Algorithm, UTR 9.

Stable:
ICU 2.1
UCHAR_DASH 

Binary property Dash.

Variations of dashes.

Stable:
ICU 2.1
UCHAR_DEFAULT_IGNORABLE_CODE_POINT 

Binary property Default_Ignorable_Code_Point (new in Unicode 3.2).

Ignorable in most processing. <2060..206F, FFF0..FFFB, E0000..E0FFF>+Other_Default_Ignorable_Code_Point+(Cf+Cc+Cs-White_Space)

Stable:
ICU 2.1
UCHAR_DEPRECATED 

Binary property Deprecated (new in Unicode 3.2).

The usage of deprecated characters is strongly discouraged.

Stable:
ICU 2.1
UCHAR_DIACRITIC 

Binary property Diacritic.

Characters that linguistically modify the meaning of another character to which they apply.

Stable:
ICU 2.1
UCHAR_EXTENDER 

Binary property Extender.

Extend the value or shape of a preceding alphabetic character, e.g., length and iteration marks.

Stable:
ICU 2.1
UCHAR_FULL_COMPOSITION_EXCLUSION 

Binary property Full_Composition_Exclusion.

CompositionExclusions.txt+Singleton Decompositions+ Non-Starter Decompositions.

Stable:
ICU 2.1
UCHAR_GRAPHEME_BASE 

Binary property Grapheme_Base (new in Unicode 3.2).

For programmatic determination of grapheme cluster boundaries. [0..10FFFF]-Cc-Cf-Cs-Co-Cn-Zl-Zp-Grapheme_Link-Grapheme_Extend-CGJ

Stable:
ICU 2.1
UCHAR_GRAPHEME_EXTEND 

Binary property Grapheme_Extend (new in Unicode 3.2).

For programmatic determination of grapheme cluster boundaries. Me+Mn+Mc+Other_Grapheme_Extend-Grapheme_Link-CGJ

Stable:
ICU 2.1
UCHAR_GRAPHEME_LINK 

Binary property Grapheme_Link (new in Unicode 3.2).

For programmatic determination of grapheme cluster boundaries.

Stable:
ICU 2.1
UCHAR_HEX_DIGIT 

Binary property Hex_Digit.

Characters commonly used for hexadecimal numbers.

Stable:
ICU 2.1
UCHAR_HYPHEN 

Binary property Hyphen.

Dashes used to mark connections between pieces of words, plus the Katakana middle dot.

Stable:
ICU 2.1
UCHAR_ID_CONTINUE 

Binary property ID_Continue.

Characters that can continue an identifier. DerivedCoreProperties.txt also says "NOTE: Cf characters should be filtered out." ID_Start+Mn+Mc+Nd+Pc

Stable:
ICU 2.1
UCHAR_ID_START 

Binary property ID_Start.

Characters that can start an identifier. Lu+Ll+Lt+Lm+Lo+Nl

Stable:
ICU 2.1
UCHAR_IDEOGRAPHIC 

Binary property Ideographic.

CJKV ideographs.

Stable:
ICU 2.1
UCHAR_IDS_BINARY_OPERATOR 

Binary property IDS_Binary_Operator (new in Unicode 3.2).

For programmatic determination of Ideographic Description Sequences.

Stable:
ICU 2.1
UCHAR_IDS_TRINARY_OPERATOR 

Binary property IDS_Trinary_Operator (new in Unicode 3.2).

For programmatic determination of Ideographic Description Sequences.

Stable:
ICU 2.1
UCHAR_JOIN_CONTROL 

Binary property Join_Control.

Format controls for cursive joining and ligation.

Stable:
ICU 2.1
UCHAR_LOGICAL_ORDER_EXCEPTION 

Binary property Logical_Order_Exception (new in Unicode 3.2).

Characters that do not use logical order and require special handling in most processing.

Stable:
ICU 2.1
UCHAR_LOWERCASE 

Binary property Lowercase.

Same as u_isULowercase, different from u_islower. Ll+Other_Lowercase

Stable:
ICU 2.1
UCHAR_MATH 

Binary property Math.

Sm+Other_Math

Stable:
ICU 2.1
UCHAR_NONCHARACTER_CODE_POINT 

Binary property Noncharacter_Code_Point.

Code points that are explicitly defined as illegal for the encoding of characters.

Stable:
ICU 2.1
UCHAR_QUOTATION_MARK 

Binary property Quotation_Mark.

Stable:
ICU 2.1
UCHAR_RADICAL 

Binary property Radical (new in Unicode 3.2).

For programmatic determination of Ideographic Description Sequences.

Stable:
ICU 2.1
UCHAR_SOFT_DOTTED 

Binary property Soft_Dotted (new in Unicode 3.2).

Characters with a "soft dot", like i or j. An accent placed on these characters causes the dot to disappear.

Stable:
ICU 2.1
UCHAR_TERMINAL_PUNCTUATION 

Binary property Terminal_Punctuation.

Punctuation characters that generally mark the end of textual units.

Stable:
ICU 2.1
UCHAR_UNIFIED_IDEOGRAPH 

Binary property Unified_Ideograph (new in Unicode 3.2).

For programmatic determination of Ideographic Description Sequences.

Stable:
ICU 2.1
UCHAR_UPPERCASE 

Binary property Uppercase.

Same as u_isUUppercase, different from u_isupper. Lu+Other_Uppercase

Stable:
ICU 2.1
UCHAR_WHITE_SPACE 

Binary property White_Space.

Same as u_isUWhiteSpace, different from u_isspace and u_isWhitespace. Space characters+TAB+CR+LF-ZWSP-ZWNBSP

Stable:
ICU 2.1
UCHAR_XID_CONTINUE 

Binary property XID_Continue.

ID_Continue modified to allow closure under normalization forms NFKC and NFKD.

Stable:
ICU 2.1
UCHAR_XID_START 

Binary property XID_Start.

ID_Start modified to allow closure under normalization forms NFKC and NFKD.

Stable:
ICU 2.1
UCHAR_CASE_SENSITIVE 

Binary property Case_Sensitive.

Either the source of a case mapping or _in_ the target of a case mapping. Not the same as the general category Cased_Letter.

Stable:
ICU 2.6
UCHAR_S_TERM 

Binary property STerm (new in Unicode 4.0.1).

Sentence Terminal. Used in UAX #29: Text Boundaries (http://www.unicode.org/reports/tr29/)

Stable:
ICU 3.0
UCHAR_VARIATION_SELECTOR 

Binary property Variation_Selector (new in Unicode 4.0.1).

Indicates all those characters that qualify as Variation Selectors. For details on the behavior of these characters, see StandardizedVariants.html and 15.6 Variation Selectors.

Stable:
ICU 3.0
UCHAR_NFD_INERT 

Binary property NFD_Inert.

ICU-specific property for characters that are inert under NFD, i.e., they do not interact with adjacent characters. See the documentation for the Normalizer2 class and the Normalizer2::isInert() method.

Stable:
ICU 3.0
UCHAR_NFKD_INERT 

Binary property NFKD_Inert.

ICU-specific property for characters that are inert under NFKD, i.e., they do not interact with adjacent characters. See the documentation for the Normalizer2 class and the Normalizer2::isInert() method.

Stable:
ICU 3.0
UCHAR_NFC_INERT 

Binary property NFC_Inert.

ICU-specific property for characters that are inert under NFC, i.e., they do not interact with adjacent characters. See the documentation for the Normalizer2 class and the Normalizer2::isInert() method.

Stable:
ICU 3.0
UCHAR_NFKC_INERT 

Binary property NFKC_Inert.

ICU-specific property for characters that are inert under NFKC, i.e., they do not interact with adjacent characters. See the documentation for the Normalizer2 class and the Normalizer2::isInert() method.

Stable:
ICU 3.0
UCHAR_SEGMENT_STARTER 

Binary Property Segment_Starter.

ICU-specific property for characters that are starters in terms of Unicode normalization and combining character sequences. They have ccc=0 and do not occur in non-initial position of the canonical decomposition of any character (like a-umlaut in NFD and a Jamo T in an NFD(Hangul LVT)). ICU uses this property for segmenting a string for generating a set of canonically equivalent strings, e.g. for canonical closure while processing collation tailoring rules.

Stable:
ICU 3.0
UCHAR_PATTERN_SYNTAX 

Binary property Pattern_Syntax (new in Unicode 4.1).

See UAX #31 Identifier and Pattern Syntax (http://www.unicode.org/reports/tr31/)

Stable:
ICU 3.4
UCHAR_PATTERN_WHITE_SPACE 

Binary property Pattern_White_Space (new in Unicode 4.1).

See UAX #31 Identifier and Pattern Syntax (http://www.unicode.org/reports/tr31/)

Stable:
ICU 3.4
UCHAR_POSIX_ALNUM 

Binary property alnum (a C/POSIX character class).

Implemented according to the UTS #18 Annex C Standard Recommendation. See the uchar.h file documentation.

Stable:
ICU 3.4
UCHAR_POSIX_BLANK 

Binary property blank (a C/POSIX character class).

Implemented according to the UTS #18 Annex C Standard Recommendation. See the uchar.h file documentation.

Stable:
ICU 3.4
UCHAR_POSIX_GRAPH 

Binary property graph (a C/POSIX character class).

Implemented according to the UTS #18 Annex C Standard Recommendation. See the uchar.h file documentation.

Stable:
ICU 3.4
UCHAR_POSIX_PRINT 

Binary property print (a C/POSIX character class).

Implemented according to the UTS #18 Annex C Standard Recommendation. See the uchar.h file documentation.

Stable:
ICU 3.4
UCHAR_POSIX_XDIGIT 

Binary property xdigit (a C/POSIX character class).

Implemented according to the UTS #18 Annex C Standard Recommendation. See the uchar.h file documentation.

Stable:
ICU 3.4
UCHAR_CASED 

Binary property Cased.

For Lowercase, Uppercase and Titlecase characters.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CASE_IGNORABLE 

Binary property Case_Ignorable.

Used in context-sensitive case mappings.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CHANGES_WHEN_LOWERCASED 

Binary property Changes_When_Lowercased.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CHANGES_WHEN_UPPERCASED 

Binary property Changes_When_Uppercased.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CHANGES_WHEN_TITLECASED 

Binary property Changes_When_Titlecased.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CHANGES_WHEN_CASEFOLDED 

Binary property Changes_When_Casefolded.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CHANGES_WHEN_CASEMAPPED 

Binary property Changes_When_Casemapped.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_CHANGES_WHEN_NFKC_CASEFOLDED 

Binary property Changes_When_NFKC_Casefolded.

Draft:
This API may be changed in the future versions and was introduced in ICU 4.4
UCHAR_BINARY_LIMIT 

One more than the last constant for binary Unicode properties.

Stable:
ICU 2.1
UCHAR_BIDI_CLASS 

Enumerated property Bidi_Class.

Same as u_charDirection, returns UCharDirection values.

Stable:
ICU 2.2
UCHAR_INT_START 

First constant for enumerated/integer Unicode properties.

Stable:
ICU 2.2
UCHAR_BLOCK 

Enumerated property Block.

Same as ublock_getCode, returns UBlockCode values.

Stable:
ICU 2.2
UCHAR_CANONICAL_COMBINING_CLASS 

Enumerated property Canonical_Combining_Class.

Same as u_getCombiningClass, returns 8-bit numeric values.

Stable:
ICU 2.2
UCHAR_DECOMPOSITION_TYPE 

Enumerated property Decomposition_Type.

Returns UDecompositionType values.

Stable:
ICU 2.2
UCHAR_EAST_ASIAN_WIDTH 

Enumerated property East_Asian_Width.

See http://www.unicode.org/reports/tr11/ Returns UEastAsianWidth values.

Stable:
ICU 2.2
UCHAR_GENERAL_CATEGORY 

Enumerated property General_Category.

Same as u_charType, returns UCharCategory values.

Stable:
ICU 2.2
UCHAR_JOINING_GROUP 

Enumerated property Joining_Group.

Returns UJoiningGroup values.

Stable:
ICU 2.2
UCHAR_JOINING_TYPE 

Enumerated property Joining_Type.

Returns UJoiningType values.

Stable:
ICU 2.2
UCHAR_LINE_BREAK 

Enumerated property Line_Break.

Returns ULineBreak values.

Stable:
ICU 2.2
UCHAR_NUMERIC_TYPE 

Enumerated property Numeric_Type.

Returns UNumericType values.

Stable:
ICU 2.2
UCHAR_SCRIPT 

Enumerated property Script.

Same as uscript_getScript, returns UScriptCode values.

Stable:
ICU 2.2
UCHAR_HANGUL_SYLLABLE_TYPE 

Enumerated property Hangul_Syllable_Type, new in Unicode 4.

Returns UHangulSyllableType values.

Stable:
ICU 2.6
UCHAR_NFD_QUICK_CHECK 

Enumerated property NFD_Quick_Check.

Returns UNormalizationCheckResult values.

Stable:
ICU 3.0
UCHAR_NFKD_QUICK_CHECK 

Enumerated property NFKD_Quick_Check.

Returns UNormalizationCheckResult values.

Stable:
ICU 3.0
UCHAR_NFC_QUICK_CHECK 

Enumerated property NFC_Quick_Check.

Returns UNormalizationCheckResult values.

Stable:
ICU 3.0
UCHAR_NFKC_QUICK_CHECK 

Enumerated property NFKC_Quick_Check.

Returns UNormalizationCheckResult values.

Stable:
ICU 3.0
UCHAR_LEAD_CANONICAL_COMBINING_CLASS 

Enumerated property Lead_Canonical_Combining_Class.

ICU-specific property for the ccc of the first code point of the decomposition, or lccc(c)=ccc(NFD(c)[0]). Useful for checking for canonically ordered text; see UNORM_FCD and http://www.unicode.org/notes/tn5/#FCD . Returns 8-bit numeric values like UCHAR_CANONICAL_COMBINING_CLASS.

Stable:
ICU 3.0
UCHAR_TRAIL_CANONICAL_COMBINING_CLASS 

Enumerated property Trail_Canonical_Combining_Class.

ICU-specific property for the ccc of the last code point of the decomposition, or tccc(c)=ccc(NFD(c)[last]). Useful for checking for canonically ordered text; see UNORM_FCD and http://www.unicode.org/notes/tn5/#FCD . Returns 8-bit numeric values like UCHAR_CANONICAL_COMBINING_CLASS.

Stable:
ICU 3.0
UCHAR_GRAPHEME_CLUSTER_BREAK 

Enumerated property Grapheme_Cluster_Break (new in Unicode 4.1).

Used in UAX #29: Text Boundaries (http://www.unicode.org/reports/tr29/) Returns UGraphemeClusterBreak values.

Stable:
ICU 3.4
UCHAR_SENTENCE_BREAK 

Enumerated property Sentence_Break (new in Unicode 4.1).

Used in UAX #29: Text Boundaries (http://www.unicode.org/reports/tr29/) Returns USentenceBreak values.

Stable:
ICU 3.4
UCHAR_WORD_BREAK 

Enumerated property Word_Break (new in Unicode 4.1).

Used in UAX #29: Text Boundaries (http://www.unicode.org/reports/tr29/) Returns UWordBreakValues values.

Stable:
ICU 3.4
UCHAR_INT_LIMIT 

One more than the last constant for enumerated/integer Unicode properties.

Stable:
ICU 2.2
UCHAR_GENERAL_CATEGORY_MASK 

Bitmask property General_Category_Mask.

This is the General_Category property returned as a bit mask. When used in u_getIntPropertyValue(c), same as U_MASK(u_charType(c)), returns bit masks for UCharCategory values where exactly one bit is set. When used with u_getPropertyValueName() and u_getPropertyValueEnum(), a multi-bit mask is used for sets of categories like "Letters". Mask values should be cast to uint32_t.

Stable:
ICU 2.4
UCHAR_MASK_START 

First constant for bit-mask Unicode properties.

Stable:
ICU 2.4
UCHAR_MASK_LIMIT 

One more than the last constant for bit-mask Unicode properties.

Stable:
ICU 2.4
UCHAR_NUMERIC_VALUE 

Double property Numeric_Value.

Corresponds to u_getNumericValue.

Stable:
ICU 2.4
UCHAR_DOUBLE_START 

First constant for double Unicode properties.

Stable:
ICU 2.4
UCHAR_DOUBLE_LIMIT 

One more than the last constant for double Unicode properties.

Stable:
ICU 2.4
UCHAR_AGE 

String property Age.

Corresponds to u_charAge.

Stable:
ICU 2.4
UCHAR_STRING_START 

First constant for string Unicode properties.

Stable:
ICU 2.4
UCHAR_BIDI_MIRRORING_GLYPH 

String property Bidi_Mirroring_Glyph.

Corresponds to u_charMirror.

Stable:
ICU 2.4
UCHAR_CASE_FOLDING 

String property Case_Folding.

Corresponds to u_strFoldCase in ustring.h.

Stable:
ICU 2.4
UCHAR_ISO_COMMENT 

String property ISO_Comment.

Corresponds to u_getISOComment.

Stable:
ICU 2.4
UCHAR_LOWERCASE_MAPPING 

String property Lowercase_Mapping.

Corresponds to u_strToLower in ustring.h.

Stable:
ICU 2.4
UCHAR_NAME 

String property Name.

Corresponds to u_charName.

Stable:
ICU 2.4
UCHAR_SIMPLE_CASE_FOLDING 

String property Simple_Case_Folding.

Corresponds to u_foldCase.

Stable:
ICU 2.4
UCHAR_SIMPLE_LOWERCASE_MAPPING 

String property Simple_Lowercase_Mapping.

Corresponds to u_tolower.

Stable:
ICU 2.4
UCHAR_SIMPLE_TITLECASE_MAPPING 

String property Simple_Titlecase_Mapping.

Corresponds to u_totitle.

Stable:
ICU 2.4
UCHAR_SIMPLE_UPPERCASE_MAPPING 

String property Simple_Uppercase_Mapping.

Corresponds to u_toupper.

Stable:
ICU 2.4
UCHAR_TITLECASE_MAPPING 

String property Titlecase_Mapping.

Corresponds to u_strToTitle in ustring.h.

Stable:
ICU 2.4
UCHAR_UNICODE_1_NAME 

String property Unicode_1_Name.

Corresponds to u_charName.

Stable:
ICU 2.4
UCHAR_UPPERCASE_MAPPING 

String property Uppercase_Mapping.

Corresponds to u_strToUpper in ustring.h.

Stable:
ICU 2.4
UCHAR_STRING_LIMIT 

One more than the last constant for string Unicode properties.

Stable:
ICU 2.4
UCHAR_INVALID_CODE 

Represents a nonexistent or invalid property or property value.

Stable:
ICU 2.4

Definition at line 174 of file uchar.h.

Selector constants for u_getPropertyName() and u_getPropertyValueName().

These selectors are used to choose which name is returned for a given property or value. All properties and values have a long name. Most have a short name, but some do not. Unicode allows for additional names, beyond the long and short name, which would be indicated by U_LONG_PROPERTY_NAME + i, where i=1, 2,...

See also:
u_getPropertyName()
u_getPropertyValueName()
Stable:
ICU 2.4

Definition at line 1406 of file uchar.h.

Sentence Break constants.

See also:
UCHAR_SENTENCE_BREAK
Stable:
ICU 3.4

Definition at line 1575 of file uchar.h.

Word Break constants.

(UWordBreak is a pre-existing enum type in ubrk.h for word break status tags.)

See also:
UCHAR_WORD_BREAK
Stable:
ICU 3.4

Definition at line 1552 of file uchar.h.


Function Documentation

void u_charAge ( UChar32  c,
UVersionInfo  versionArray 
)

Get the "age" of the code point.

The "age" is the Unicode version when the code point was first designated (as a non-character or for Private Use) or assigned a character. This can be useful to avoid emitting code points to receiving processes that do not accept newer characters. The data is from the UCD file DerivedAge.txt.

Parameters:
c The code point.
versionArray The Unicode version number array, to be filled in.
Stable:
ICU 2.1
int32_t u_charDigitValue ( UChar32  c  ) 

Returns the decimal digit value of a decimal digit character.

Such characters have the general category "Nd" (decimal digit numbers) and a Numeric_Type of Decimal.

Unlike ICU releases before 2.6, no digit values are returned for any Han characters because Han number characters are often used with a special Chinese-style number format (with characters for powers of 10 in between) instead of in decimal-positional notation. Unicode 4 explicitly assigns Han number characters the Numeric_Type Numeric instead of Decimal. See Jitterbug 1483 for more details.

Use u_getIntPropertyValue(c, UCHAR_NUMERIC_TYPE) and u_getNumericValue() for complete numeric Unicode properties.

Parameters:
c the code point for which to get the decimal digit value
Returns:
the decimal digit value of c, or -1 if c is not a decimal digit character
See also:
u_getNumericValue
Stable:
ICU 2.0
UCharDirection u_charDirection ( UChar32  c  ) 

Returns the bidirectional category value for the code point, which is used in the Unicode bidirectional algorithm (UAX #9 http://www.unicode.org/reports/tr9/).

Note that some unassigned code points have bidi values of R or AL because they are in blocks that are reserved for Right-To-Left scripts.

Same as java.lang.Character.getDirectionality()

Parameters:
c the code point to be tested
Returns:
the bidirectional category (UCharDirection) value
See also:
UCharDirection
Stable:
ICU 2.0
UChar32 u_charFromName ( UCharNameChoice  nameChoice,
const char *  name,
UErrorCode pErrorCode 
)

Find a Unicode character by its name and return its code point value.

The name is matched exactly and completely. If the name does not correspond to a code point, pErrorCode is set to U_INVALID_CHAR_FOUND. A Unicode 1.0 name is matched only if it differs from the modern name. Unicode names are all uppercase. Extended names are lowercase followed by an uppercase hexadecimal number, and within angle brackets.

Parameters:
nameChoice Selector for which name to match.
name The name to match.
pErrorCode Pointer to a UErrorCode variable
Returns:
The Unicode value of the code point with the given name, or an undefined value if there is no such code point.
See also:
UCharNameChoice
u_charName
u_enumCharNames
Stable:
ICU 1.7
UChar32 u_charMirror ( UChar32  c  ) 

Maps the specified character to a "mirror-image" character.

For characters with the Bidi_Mirrored property, implementations sometimes need a "poor man's" mapping to another Unicode character (code point) such that the default glyph may serve as the mirror-image of the default glyph of the specified character. This is useful for text conversion to and from codepages with visual order, and for displays without glyph selecetion capabilities.

Parameters:
c the code point to be mapped
Returns:
another Unicode code point that may serve as a mirror-image substitute, or c itself if there is no such mapping or c does not have the Bidi_Mirrored property
See also:
UCHAR_BIDI_MIRRORED
u_isMirrored
Stable:
ICU 2.0
int32_t u_charName ( UChar32  code,
UCharNameChoice  nameChoice,
char *  buffer,
int32_t  bufferLength,
UErrorCode pErrorCode 
)

Retrieve the name of a Unicode character.

Depending on nameChoice, the character name written into the buffer is the "modern" name or the name that was defined in Unicode version 1.0. The name contains only "invariant" characters like A-Z, 0-9, space, and '-'. Unicode 1.0 names are only retrieved if they are different from the modern names and if the data file contains the data for them. gennames may or may not be called with a command line option to include 1.0 names in unames.dat.

Parameters:
code The character (code point) for which to get the name. It must be 0<=code<=0x10ffff.
nameChoice Selector for which name to get.
buffer Destination address for copying the name. The name will always be zero-terminated. If there is no name, then the buffer will be set to the empty string.
bufferLength ==sizeof(buffer)
pErrorCode Pointer to a UErrorCode variable; check for U_SUCCESS() after u_charName() returns.
Returns:
The length of the name, or 0 if there is no name for this character. If the bufferLength is less than or equal to the length, then the buffer contains the truncated name and the returned length indicates the full length of the name. The length does not include the zero-termination.
See also:
UCharNameChoice
u_charFromName
u_enumCharNames
Stable:
ICU 2.0
int8_t u_charType ( UChar32  c  ) 

Returns the general category value for the code point.

Same as java.lang.Character.getType().

Parameters:
c the code point to be tested
Returns:
the general category (UCharCategory) value
See also:
UCharCategory
Stable:
ICU 2.0
int32_t u_digit ( UChar32  ch,
int8_t  radix 
)

Returns the decimal digit value of the code point in the specified radix.

If the radix is not in the range 2<=radix<=36 or if the value of c is not a valid digit in the specified radix, -1 is returned. A character is a valid digit if at least one of the following is true:

  • The character has a decimal digit value. Such characters have the general category "Nd" (decimal digit numbers) and a Numeric_Type of Decimal. In this case the value is the character's decimal digit value.
  • The character is one of the uppercase Latin letters 'A' through 'Z'. In this case the value is c-'A'+10.
  • The character is one of the lowercase Latin letters 'a' through 'z'. In this case the value is ch-'a'+10.
  • Latin letters from both the ASCII range (0061..007A, 0041..005A) as well as from the Fullwidth ASCII range (FF41..FF5A, FF21..FF3A) are recognized.

Same as java.lang.Character.digit().

Parameters:
ch the code point to be tested.
radix the radix.
Returns:
the numeric value represented by the character in the specified radix, or -1 if there is no value or if the value exceeds the radix.
See also:
UCHAR_NUMERIC_TYPE
u_forDigit
u_charDigitValue
u_isdigit
Stable:
ICU 2.0
void u_enumCharNames ( UChar32  start,
UChar32  limit,
UEnumCharNamesFn fn,
void *  context,
UCharNameChoice  nameChoice,
UErrorCode pErrorCode 
)

Enumerate all assigned Unicode characters between the start and limit code points (start inclusive, limit exclusive) and call a function for each, passing the code point value and the character name.

For Unicode 1.0 names, only those are enumerated that differ from the modern names.

Parameters:
start The first code point in the enumeration range.
limit One more than the last code point in the enumeration range (the first one after the range).
fn The function that is to be called for each character name.
context An arbitrary pointer that is passed to the function.
nameChoice Selector for which kind of names to enumerate.
pErrorCode Pointer to a UErrorCode variable
See also:
UCharNameChoice
UEnumCharNamesFn
u_charName
u_charFromName
Stable:
ICU 1.7
void u_enumCharTypes ( UCharEnumTypeRange enumRange,
const void *  context 
)

Enumerate efficiently all code points with their Unicode general categories.

This is useful for building data structures (e.g., UnicodeSet's), for enumerating all assigned code points (type!=U_UNASSIGNED), etc.

For each contiguous range of code points with a given general category ("character type"), the UCharEnumTypeRange function is called. Adjacent ranges have different types. The Unicode Standard guarantees that the numeric value of the type is 0..31.

Parameters:
enumRange a pointer to a function that is called for each contiguous range of code points with the same general category
context an opaque pointer that is passed on to the callback function
Stable:
ICU 2.1
See also:
UCharCategory
UCharEnumTypeRange
UChar32 u_foldCase ( UChar32  c,
uint32_t  options 
)

The given character is mapped to its case folding equivalent according to UnicodeData.txt and CaseFolding.txt; if the character has no case folding equivalent, the character itself is returned.

This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see ustring.h and the UnicodeString class. See also the User Guide chapter on C/POSIX migration: http://icu-project.org/userguide/posix.html#case_mappings

Parameters:
c the code point to be mapped
options Either U_FOLD_CASE_DEFAULT or U_FOLD_CASE_EXCLUDE_SPECIAL_I
Returns:
the Simple_Case_Folding of the code point, if any; otherwise the code point itself.
Stable:
ICU 2.0
UChar32 u_forDigit ( int32_t  digit,
int8_t  radix 
)

Determines the character representation for a specific digit in the specified radix.

If the value of radix is not a valid radix, or the value of digit is not a valid digit in the specified radix, the null character (U+0000) is returned.

The radix argument is valid if it is greater than or equal to 2 and less than or equal to 36. The digit argument is valid if 0 <= digit < radix.

If the digit is less than 10, then '0' + digit is returned. Otherwise, the value 'a' + digit - 10 is returned.

Same as java.lang.Character.forDigit().

Parameters:
digit the number to convert to a character.
radix the radix.
Returns:
the char representation of the specified digit in the specified radix.
See also:
u_digit
u_charDigitValue
u_isdigit
Stable:
ICU 2.0
uint8_t u_getCombiningClass ( UChar32  c  ) 

Returns the combining class of the code point as specified in UnicodeData.txt.

Parameters:
c the code point of the character
Returns:
the combining class of the character
Stable:
ICU 2.0
int32_t u_getFC_NFKC_Closure ( UChar32  c,
UChar dest,
int32_t  destCapacity,
UErrorCode pErrorCode 
)

Get the FC_NFKC_Closure property string for a character.

See Unicode Standard Annex #15 for details, search for "FC_NFKC_Closure" or for "FNC": http://www.unicode.org/reports/tr15/

Parameters:
c The character (code point) for which to get the FC_NFKC_Closure string. It must be 0<=c<=0x10ffff.
dest Destination address for copying the string. The string will be zero-terminated if possible. If there is no FC_NFKC_Closure string, then the buffer will be set to the empty string.
destCapacity ==sizeof(dest)
pErrorCode Pointer to a UErrorCode variable.
Returns:
The length of the string, or 0 if there is no FC_NFKC_Closure string for this character. If the destCapacity is less than or equal to the length, then the buffer contains the truncated name and the returned length indicates the full length of the name. The length does not include the zero-termination.
Stable:
ICU 2.2
int32_t u_getIntPropertyMaxValue ( UProperty  which  ) 

Get the maximum value for an enumerated/integer/binary Unicode property.

Can be used together with u_getIntPropertyMinValue to allocate arrays of UnicodeSet or similar.

Examples for min/max values (for Unicode 3.2):

  • UCHAR_BIDI_CLASS: 0/18 (U_LEFT_TO_RIGHT/U_BOUNDARY_NEUTRAL)
  • UCHAR_SCRIPT: 0/45 (USCRIPT_COMMON/USCRIPT_TAGBANWA)
  • UCHAR_IDEOGRAPHIC: 0/1 (FALSE/TRUE)

For undefined UProperty constant values, min/max values will be 0/-1.

Parameters:
which UProperty selector constant, identifies which binary property to check. Must be UCHAR_BINARY_START<=which<UCHAR_BINARY_LIMIT or UCHAR_INT_START<=which<UCHAR_INT_LIMIT.
Returns:
Maximum value returned by u_getIntPropertyValue for a Unicode property. <=0 if the property selector is out of range.
See also:
UProperty
u_hasBinaryProperty
u_getUnicodeVersion
u_getIntPropertyMaxValue
u_getIntPropertyValue
Stable:
ICU 2.2
int32_t u_getIntPropertyMinValue ( UProperty  which  ) 

Get the minimum value for an enumerated/integer/binary Unicode property.

Can be used together with u_getIntPropertyMaxValue to allocate arrays of UnicodeSet or similar.

Parameters:
which UProperty selector constant, identifies which binary property to check. Must be UCHAR_BINARY_START<=which<UCHAR_BINARY_LIMIT or UCHAR_INT_START<=which<UCHAR_INT_LIMIT.
Returns:
Minimum value returned by u_getIntPropertyValue for a Unicode property. 0 if the property selector is out of range.
See also:
UProperty
u_hasBinaryProperty
u_getUnicodeVersion
u_getIntPropertyMaxValue
u_getIntPropertyValue
Stable:
ICU 2.2
int32_t u_getIntPropertyValue ( UChar32  c,
UProperty  which 
)

Get the property value for an enumerated or integer Unicode property for a code point.

Also returns binary and mask property values.

Unicode, especially in version 3.2, defines many more properties than the original set in UnicodeData.txt.

The properties APIs are intended to reflect Unicode properties as defined in the Unicode Character Database (UCD) and Unicode Technical Reports (UTR). For details about the properties see http://www.unicode.org/ . For names of Unicode properties see the UCD file PropertyAliases.txt.

Sample usage: UEastAsianWidth ea=(UEastAsianWidth)u_getIntPropertyValue(c, UCHAR_EAST_ASIAN_WIDTH); UBool b=(UBool)u_getIntPropertyValue(c, UCHAR_IDEOGRAPHIC);

Parameters:
c Code point to test.
which UProperty selector constant, identifies which property to check. Must be UCHAR_BINARY_START<=which<UCHAR_BINARY_LIMIT or UCHAR_INT_START<=which<UCHAR_INT_LIMIT or UCHAR_MASK_START<=which<UCHAR_MASK_LIMIT.
Returns:
Numeric value that is directly the property value or, for enumerated properties, corresponds to the numeric value of the enumerated constant of the respective property value enumeration type (cast to enum type if necessary). Returns 0 or 1 (for FALSE/TRUE) for binary Unicode properties. Returns a bit-mask for mask properties. Returns 0 if 'which' is out of bounds or if the Unicode version does not have data for the property at all, or not for this code point.
See also:
UProperty
u_hasBinaryProperty
u_getIntPropertyMinValue
u_getIntPropertyMaxValue
u_getUnicodeVersion
Stable:
ICU 2.2
int32_t u_getISOComment ( UChar32  c,
char *  dest,
int32_t  destCapacity,
UErrorCode pErrorCode 
)

Get the ISO 10646 comment for a character.

The ISO 10646 comment is an informative field in the Unicode Character Database (UnicodeData.txt field 11) and is from the ISO 10646 names list.

Note: Unicode 5.2 removes all ISO comment data, resulting in empty strings returned for all characters.

Parameters:
c The character (code point) for which to get the ISO comment. It must be 0<=c<=0x10ffff.
dest Destination address for copying the comment. The comment will be zero-terminated if possible. If there is no comment, then the buffer will be set to the empty string.
destCapacity ==sizeof(dest)
pErrorCode Pointer to a UErrorCode variable; check for U_SUCCESS() after u_getISOComment() returns.
Returns:
The length of the comment, or 0 if there is no comment for this character. If the destCapacity is less than or equal to the length, then the buffer contains the truncated name and the returned length indicates the full length of the name. The length does not include the zero-termination.
Stable:
ICU 2.2
double u_getNumericValue ( UChar32  c  ) 

Get the numeric value for a Unicode code point as defined in the Unicode Character Database.

A "double" return type is necessary because some numeric values are fractions, negative, or too large for int32_t.

For characters without any numeric values in the Unicode Character Database, this function will return U_NO_NUMERIC_VALUE.

Similar to java.lang.Character.getNumericValue(), but u_getNumericValue() also supports negative values, large values, and fractions, while Java's getNumericValue() returns values 10..35 for ASCII letters.

Parameters:
c Code point to get the numeric value for.
Returns:
Numeric value of c, or U_NO_NUMERIC_VALUE if none is defined.
See also:
U_NO_NUMERIC_VALUE
Stable:
ICU 2.2
UProperty u_getPropertyEnum ( const char *  alias  ) 

Return the UProperty enum for a given property name, as specified in the Unicode database file PropertyAliases.txt.

Short, long, and any other variants are recognized.

In addition, this function maps the synthetic names "gcm" / "General_Category_Mask" to the property UCHAR_GENERAL_CATEGORY_MASK. These names are not in PropertyAliases.txt.

Parameters:
alias the property name to be matched. The name is compared using "loose matching" as described in PropertyAliases.txt.
Returns:
a UProperty enum, or UCHAR_INVALID_CODE if the given name does not match any property.
See also:
UProperty
Stable:
ICU 2.4
const char* u_getPropertyName ( UProperty  property,
UPropertyNameChoice  nameChoice 
)

Return the Unicode name for a given property, as given in the Unicode database file PropertyAliases.txt.

In addition, this function maps the property UCHAR_GENERAL_CATEGORY_MASK to the synthetic names "gcm" / "General_Category_Mask". These names are not in PropertyAliases.txt.

Parameters:
property UProperty selector other than UCHAR_INVALID_CODE. If out of range, NULL is returned.
nameChoice selector for which name to get. If out of range, NULL is returned. All properties have a long name. Most have a short name, but some do not. Unicode allows for additional names; if present these will be returned by U_LONG_PROPERTY_NAME + i, where i=1, 2,...
Returns:
a pointer to the name, or NULL if either the property or the nameChoice is out of range. If a given nameChoice returns NULL, then all larger values of nameChoice will return NULL, with one exception: if NULL is returned for U_SHORT_PROPERTY_NAME, then U_LONG_PROPERTY_NAME (and higher) may still return a non-NULL value. The returned pointer is valid until u_cleanup() is called.
See also:
UProperty
UPropertyNameChoice
Stable:
ICU 2.4
int32_t u_getPropertyValueEnum ( UProperty  property,
const char *  alias 
)

Return the property value integer for a given value name, as specified in the Unicode database file PropertyValueAliases.txt.

Short, long, and any other variants are recognized.

Note: Some of the names in PropertyValueAliases.txt will only be recognized with UCHAR_GENERAL_CATEGORY_MASK, not UCHAR_GENERAL_CATEGORY. These include: "C" / "Other", "L" / "Letter", "LC" / "Cased_Letter", "M" / "Mark", "N" / "Number", "P" / "Punctuation", "S" / "Symbol", and "Z" / "Separator".

Parameters:
property UProperty selector constant. Must be UCHAR_BINARY_START<=which<UCHAR_BINARY_LIMIT or UCHAR_INT_START<=which<UCHAR_INT_LIMIT or UCHAR_MASK_START<=which<UCHAR_MASK_LIMIT. If out of range, UCHAR_INVALID_CODE is returned.
alias the value name to be matched. The name is compared using "loose matching" as described in PropertyValueAliases.txt.
Returns:
a value integer or UCHAR_INVALID_CODE if the given name does not match any value of the given property, or if the property is invalid. Note: U CHAR_GENERAL_CATEGORY values are not values of UCharCategory, but rather mask values produced by U_GET_GC_MASK(). This allows grouped categories such as [:L:] to be represented.
See also:
UProperty
Stable:
ICU 2.4
const char* u_getPropertyValueName ( UProperty  property,
int32_t  value,
UPropertyNameChoice  nameChoice 
)

Return the Unicode name for a given property value, as given in the Unicode database file PropertyValueAliases.txt.

Note: Some of the names in PropertyValueAliases.txt can only be retrieved using UCHAR_GENERAL_CATEGORY_MASK, not UCHAR_GENERAL_CATEGORY. These include: "C" / "Other", "L" / "Letter", "LC" / "Cased_Letter", "M" / "Mark", "N" / "Number", "P" / "Punctuation", "S" / "Symbol", and "Z" / "Separator".

Parameters:
property UProperty selector constant. Must be UCHAR_BINARY_START<=which<UCHAR_BINARY_LIMIT or UCHAR_INT_START<=which<UCHAR_INT_LIMIT or UCHAR_MASK_START<=which<UCHAR_MASK_LIMIT. If out of range, NULL is returned.
value selector for a value for the given property. If out of range, NULL is returned. In general, valid values range from 0 up to some maximum. There are a few exceptions: (1.) UCHAR_BLOCK values begin at the non-zero value UBLOCK_BASIC_LATIN. (2.) UCHAR_CANONICAL_COMBINING_CLASS values are not contiguous and range from 0..240. (3.) UCHAR_GENERAL_CATEGORY_MASK values are not values of UCharCategory, but rather mask values produced by U_GET_GC_MASK(). This allows grouped categories such as [:L:] to be represented. Mask values range non-contiguously from 1..U_GC_P_MASK.
nameChoice selector for which name to get. If out of range, NULL is returned. All values have a long name. Most have a short name, but some do not. Unicode allows for additional names; if present these will be returned by U_LONG_PROPERTY_NAME + i, where i=1, 2,...
Returns:
a pointer to the name, or NULL if either the property or the nameChoice is out of range. If a given nameChoice returns NULL, then all larger values of nameChoice will return NULL, with one exception: if NULL is returned for U_SHORT_PROPERTY_NAME, then U_LONG_PROPERTY_NAME (and higher) may still return a non-NULL value. The returned pointer is valid until u_cleanup() is called.
See also:
UProperty
UPropertyNameChoice
Stable:
ICU 2.4
void u_getUnicodeVersion ( UVersionInfo  versionArray  ) 

Gets the Unicode version information.

The version array is filled in with the version information for the Unicode standard that is currently used by ICU. For example, Unicode version 3.1.1 is represented as an array with the values { 3, 1, 1, 0 }.

Parameters:
versionArray an output array that will be filled in with the Unicode version number
Stable:
ICU 2.0
UBool u_hasBinaryProperty ( UChar32  c,
UProperty  which 
)

Check a binary Unicode property for a code point.

Unicode, especially in version 3.2, defines many more properties than the original set in UnicodeData.txt.

The properties APIs are intended to reflect Unicode properties as defined in the Unicode Character Database (UCD) and Unicode Technical Reports (UTR). For details about the properties see http://www.unicode.org/ucd/ . For names of Unicode properties see the UCD file PropertyAliases.txt.

Important: If ICU is built with UCD files from Unicode versions below 3.2, then properties marked with "new in Unicode 3.2" are not or not fully available.

Parameters:
c Code point to test.
which UProperty selector constant, identifies which binary property to check. Must be UCHAR_BINARY_START<=which<UCHAR_BINARY_LIMIT.
Returns:
TRUE or FALSE according to the binary Unicode property value for c. Also FALSE if 'which' is out of bounds or if the Unicode version does not have data for the property at all, or not for this code point.
See also:
UProperty
u_getIntPropertyValue
u_getUnicodeVersion
Stable:
ICU 2.1
UBool u_isalnum ( UChar32  c  ) 

Determines whether the specified code point is an alphanumeric character (letter or digit) according to Java.

True for characters with general categories "L" (letters) and "Nd" (decimal digit numbers).

Same as java.lang.Character.isLetterOrDigit().

In addition to being equivalent to a Java function, this also serves as a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is an alphanumeric character according to Character.isLetterOrDigit()
Stable:
ICU 2.0
UBool u_isalpha ( UChar32  c  ) 

Determines whether the specified code point is a letter character.

True for general categories "L" (letters).

Same as java.lang.Character.isLetter().

In addition to being equivalent to a Java function, this also serves as a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a letter character
See also:
u_isdigit
u_isalnum
Stable:
ICU 2.0
UBool u_isbase ( UChar32  c  ) 

Determines whether the specified code point is a base character.

True for general categories "L" (letters), "N" (numbers), "Mc" (spacing combining marks), and "Me" (enclosing marks).

Note that this is different from the Unicode definition in chapter 3.5, conformance clause D13, which defines base characters to be all characters (not Cn) that do not graphically combine with preceding characters (M) and that are neither control (Cc) or format (Cf) characters.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a base character according to this function
See also:
u_isalpha
u_isdigit
Stable:
ICU 2.0
UBool u_isblank ( UChar32  c  ) 

Determines whether the specified code point is a "blank" or "horizontal space", a character that visibly separates words on a line.

The following are equivalent definitions:

TRUE for Unicode White_Space characters except for "vertical space controls" where "vertical space controls" are the following characters: U+000A (LF) U+000B (VT) U+000C (FF) U+000D (CR) U+0085 (NEL) U+2028 (LS) U+2029 (PS)

same as

TRUE for U+0009 (TAB) and characters with general category "Zs" (space separators) except Zero Width Space (ZWSP, U+200B).

Note: There are several ICU whitespace functions; please see the uchar.h file documentation for a detailed comparison.

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a "blank"
Stable:
ICU 2.6
UBool u_iscntrl ( UChar32  c  ) 

Determines whether the specified code point is a control character (as defined by this function).

A control character is one of the following:

  • ISO 8-bit control character (U+0000..U+001f and U+007f..U+009f)
  • U_CONTROL_CHAR (Cc)
  • U_FORMAT_CHAR (Cf)
  • U_LINE_SEPARATOR (Zl)
  • U_PARAGRAPH_SEPARATOR (Zp)

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a control character
See also:
UCHAR_DEFAULT_IGNORABLE_CODE_POINT
u_isprint
Stable:
ICU 2.0
UBool u_isdefined ( UChar32  c  ) 

Determines whether the specified code point is "defined", which usually means that it is assigned a character.

True for general categories other than "Cn" (other, not assigned), i.e., true for all code points mentioned in UnicodeData.txt.

Note that non-character code points (e.g., U+FDD0) are not "defined" (they are Cn), but surrogate code points are "defined" (Cs).

Same as java.lang.Character.isDefined().

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is assigned a character
See also:
u_isdigit
u_isalpha
u_isalnum
u_isupper
u_islower
u_istitle
Stable:
ICU 2.0
UBool u_isdigit ( UChar32  c  ) 

Determines whether the specified code point is a digit character according to Java.

True for characters with general category "Nd" (decimal digit numbers). Beginning with Unicode 4, this is the same as testing for the Numeric_Type of Decimal.

Same as java.lang.Character.isDigit().

In addition to being equivalent to a Java function, this also serves as a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a digit character according to Character.isDigit()
Stable:
ICU 2.0
UBool u_isgraph ( UChar32  c  ) 

Determines whether the specified code point is a "graphic" character (printable, excluding spaces).

TRUE for all characters except those with general categories "Cc" (control codes), "Cf" (format controls), "Cs" (surrogates), "Cn" (unassigned), and "Z" (separators).

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a "graphic" character
Stable:
ICU 2.6
UBool u_isIDIgnorable ( UChar32  c  ) 

Determines if the specified character should be regarded as an ignorable character in an identifier, according to Java.

True for characters with general category "Cf" (format controls) as well as non-whitespace ISO controls (U+0000..U+0008, U+000E..U+001B, U+007F..U+0084, U+0086..U+009F).

Same as java.lang.Character.isIdentifierIgnorable() except that Java also returns TRUE for U+0085 Next Line (it omits U+0085 from whitespace ISO controls).

Note that Unicode just recommends to ignore Cf (format controls).

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is ignorable in identifiers according to Java
See also:
UCHAR_DEFAULT_IGNORABLE_CODE_POINT
u_isIDStart
u_isIDPart
Stable:
ICU 2.0
UBool u_isIDPart ( UChar32  c  ) 

Determines if the specified character is permissible in an identifier according to Java.

True for characters with general categories "L" (letters), "Nl" (letter numbers), "Nd" (decimal digits), "Mc" and "Mn" (combining marks), "Pc" (connecting punctuation), and u_isIDIgnorable(c).

Same as java.lang.Character.isUnicodeIdentifierPart(). Almost the same as Unicode's ID_Continue (UCHAR_ID_CONTINUE) except that Unicode recommends to ignore Cf which is less than u_isIDIgnorable(c).

Parameters:
c the code point to be tested
Returns:
TRUE if the code point may occur in an identifier according to Java
See also:
UCHAR_ID_CONTINUE
u_isIDStart
u_isIDIgnorable
Stable:
ICU 2.0
UBool u_isIDStart ( UChar32  c  ) 

Determines if the specified character is permissible as the first character in an identifier according to Unicode (The Unicode Standard, Version 3.0, chapter 5.16 Identifiers).

True for characters with general categories "L" (letters) and "Nl" (letter numbers).

Same as java.lang.Character.isUnicodeIdentifierStart(). Same as UCHAR_ID_START

Parameters:
c the code point to be tested
Returns:
TRUE if the code point may start an identifier
See also:
UCHAR_ID_START
u_isalpha
u_isIDPart
Stable:
ICU 2.0
UBool u_isISOControl ( UChar32  c  ) 

Determines whether the specified code point is an ISO control code.

True for U+0000..U+001f and U+007f..U+009f (general category "Cc").

Same as java.lang.Character.isISOControl().

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is an ISO control code
See also:
u_iscntrl
Stable:
ICU 2.6
UBool u_isJavaIDPart ( UChar32  c  ) 

Determines if the specified character is permissible in a Java identifier.

In addition to u_isIDPart(c), true for characters with general category "Sc" (currency symbols).

Same as java.lang.Character.isJavaIdentifierPart().

Parameters:
c the code point to be tested
Returns:
TRUE if the code point may occur in a Java identifier
See also:
u_isIDIgnorable
u_isJavaIDStart
u_isalpha
u_isdigit
u_isIDPart
Stable:
ICU 2.0
UBool u_isJavaIDStart ( UChar32  c  ) 

Determines if the specified character is permissible as the first character in a Java identifier.

In addition to u_isIDStart(c), true for characters with general categories "Sc" (currency symbols) and "Pc" (connecting punctuation).

Same as java.lang.Character.isJavaIdentifierStart().

Parameters:
c the code point to be tested
Returns:
TRUE if the code point may start a Java identifier
See also:
u_isJavaIDPart
u_isalpha
u_isIDStart
Stable:
ICU 2.0
UBool u_isJavaSpaceChar ( UChar32  c  ) 

Determine if the specified code point is a space character according to Java.

True for characters with general categories "Z" (separators), which does not include control codes (e.g., TAB or Line Feed).

Same as java.lang.Character.isSpaceChar().

Note: There are several ICU whitespace functions; please see the uchar.h file documentation for a detailed comparison.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a space character according to Character.isSpaceChar()
See also:
u_isspace
u_isWhitespace
u_isUWhiteSpace
Stable:
ICU 2.6
UBool u_islower ( UChar32  c  ) 

Determines whether the specified code point has the general category "Ll" (lowercase letter).

Same as java.lang.Character.isLowerCase().

This misses some characters that are also lowercase but have a different general category value. In order to include those, use UCHAR_LOWERCASE.

In addition to being equivalent to a Java function, this also serves as a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is an Ll lowercase letter
See also:
UCHAR_LOWERCASE
u_isupper
u_istitle
Stable:
ICU 2.0
UBool u_isMirrored ( UChar32  c  ) 

Determines whether the code point has the Bidi_Mirrored property.

This property is set for characters that are commonly used in Right-To-Left contexts and need to be displayed with a "mirrored" glyph.

Same as java.lang.Character.isMirrored(). Same as UCHAR_BIDI_MIRRORED

Parameters:
c the code point to be tested
Returns:
TRUE if the character has the Bidi_Mirrored property
See also:
UCHAR_BIDI_MIRRORED
Stable:
ICU 2.0
UBool u_isprint ( UChar32  c  ) 

Determines whether the specified code point is a printable character.

True for general categories other than "C" (controls).

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a printable character
See also:
UCHAR_DEFAULT_IGNORABLE_CODE_POINT
u_iscntrl
Stable:
ICU 2.0
UBool u_ispunct ( UChar32  c  ) 

Determines whether the specified code point is a punctuation character.

True for characters with general categories "P" (punctuation).

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a punctuation character
Stable:
ICU 2.6
UBool u_isspace ( UChar32  c  ) 

Determines if the specified character is a space character or not.

Note: There are several ICU whitespace functions; please see the uchar.h file documentation for a detailed comparison.

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the character to be tested
Returns:
true if the character is a space character; false otherwise.
See also:
u_isJavaSpaceChar
u_isWhitespace
u_isUWhiteSpace
Stable:
ICU 2.0
UBool u_istitle ( UChar32  c  ) 

Determines whether the specified code point is a titlecase letter.

True for general category "Lt" (titlecase letter).

Same as java.lang.Character.isTitleCase().

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is an Lt titlecase letter
See also:
u_isupper
u_islower
u_totitle
Stable:
ICU 2.0
UBool u_isUAlphabetic ( UChar32  c  ) 

Check if a code point has the Alphabetic Unicode property.

Same as u_hasBinaryProperty(c, UCHAR_ALPHABETIC). This is different from u_isalpha!

Parameters:
c Code point to test
Returns:
true if the code point has the Alphabetic Unicode property, false otherwise
See also:
UCHAR_ALPHABETIC
u_isalpha
u_hasBinaryProperty
Stable:
ICU 2.1
UBool u_isULowercase ( UChar32  c  ) 

Check if a code point has the Lowercase Unicode property.

Same as u_hasBinaryProperty(c, UCHAR_LOWERCASE). This is different from u_islower!

Parameters:
c Code point to test
Returns:
true if the code point has the Lowercase Unicode property, false otherwise
See also:
UCHAR_LOWERCASE
u_islower
u_hasBinaryProperty
Stable:
ICU 2.1
UBool u_isupper ( UChar32  c  ) 

Determines whether the specified code point has the general category "Lu" (uppercase letter).

Same as java.lang.Character.isUpperCase().

This misses some characters that are also uppercase but have a different general category value. In order to include those, use UCHAR_UPPERCASE.

In addition to being equivalent to a Java function, this also serves as a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is an Lu uppercase letter
See also:
UCHAR_UPPERCASE
u_islower
u_istitle
u_tolower
Stable:
ICU 2.0
UBool u_isUUppercase ( UChar32  c  ) 

Check if a code point has the Uppercase Unicode property.

Same as u_hasBinaryProperty(c, UCHAR_UPPERCASE). This is different from u_isupper!

Parameters:
c Code point to test
Returns:
true if the code point has the Uppercase Unicode property, false otherwise
See also:
UCHAR_UPPERCASE
u_isupper
u_hasBinaryProperty
Stable:
ICU 2.1
UBool u_isUWhiteSpace ( UChar32  c  ) 

Check if a code point has the White_Space Unicode property.

Same as u_hasBinaryProperty(c, UCHAR_WHITE_SPACE). This is different from both u_isspace and u_isWhitespace!

Note: There are several ICU whitespace functions; please see the uchar.h file documentation for a detailed comparison.

Parameters:
c Code point to test
Returns:
true if the code point has the White_Space Unicode property, false otherwise.
See also:
UCHAR_WHITE_SPACE
u_isWhitespace
u_isspace
u_isJavaSpaceChar
u_hasBinaryProperty
Stable:
ICU 2.1
UBool u_isWhitespace ( UChar32  c  ) 

Determines if the specified code point is a whitespace character according to Java/ICU.

A character is considered to be a Java whitespace character if and only if it satisfies one of the following criteria:

  • It is a Unicode separator (categories "Z"), but is not a no-break space (U+00A0 NBSP or U+2007 Figure Space or U+202F Narrow NBSP).
  • It is U+0009 HORIZONTAL TABULATION.
  • It is U+000A LINE FEED.
  • It is U+000B VERTICAL TABULATION.
  • It is U+000C FORM FEED.
  • It is U+000D CARRIAGE RETURN.
  • It is U+001C FILE SEPARATOR.
  • It is U+001D GROUP SEPARATOR.
  • It is U+001E RECORD SEPARATOR.
  • It is U+001F UNIT SEPARATOR.
  • It is U+0085 NEXT LINE.

Same as java.lang.Character.isWhitespace() except that Java omits U+0085.

Note: There are several ICU whitespace functions; please see the uchar.h file documentation for a detailed comparison.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a whitespace character according to Java/ICU
See also:
u_isspace
u_isJavaSpaceChar
u_isUWhiteSpace
Stable:
ICU 2.0
UBool u_isxdigit ( UChar32  c  ) 

Determines whether the specified code point is a hexadecimal digit.

This is equivalent to u_digit(c, 16)>=0. True for characters with general category "Nd" (decimal digit numbers) as well as Latin letters a-f and A-F in both ASCII and Fullwidth ASCII. (That is, for letters with code points 0041..0046, 0061..0066, FF21..FF26, FF41..FF46.)

In order to narrow the definition of hexadecimal digits to only ASCII characters, use (c<=0x7f && u_isxdigit(c)).

This is a C/POSIX migration function. See the comments about C/POSIX character classification functions in the documentation at the top of this header file.

Parameters:
c the code point to be tested
Returns:
TRUE if the code point is a hexadecimal digit
Stable:
ICU 2.6
UChar32 u_tolower ( UChar32  c  ) 

The given character is mapped to its lowercase equivalent according to UnicodeData.txt; if the character has no lowercase equivalent, the character itself is returned.

Same as java.lang.Character.toLowerCase().

This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see ustring.h and the UnicodeString class. See also the User Guide chapter on C/POSIX migration: http://icu-project.org/userguide/posix.html#case_mappings

Parameters:
c the code point to be mapped
Returns:
the Simple_Lowercase_Mapping of the code point, if any; otherwise the code point itself.
Stable:
ICU 2.0
UChar32 u_totitle ( UChar32  c  ) 

The given character is mapped to its titlecase equivalent according to UnicodeData.txt; if none is defined, the character itself is returned.

Same as java.lang.Character.toTitleCase().

This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see ustring.h and the UnicodeString class. See also the User Guide chapter on C/POSIX migration: http://icu-project.org/userguide/posix.html#case_mappings

Parameters:
c the code point to be mapped
Returns:
the Simple_Titlecase_Mapping of the code point, if any; otherwise the code point itself.
Stable:
ICU 2.0
UChar32 u_toupper ( UChar32  c  ) 

The given character is mapped to its uppercase equivalent according to UnicodeData.txt; if the character has no uppercase equivalent, the character itself is returned.

Same as java.lang.Character.toUpperCase().

This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see ustring.h and the UnicodeString class. See also the User Guide chapter on C/POSIX migration: http://icu-project.org/userguide/posix.html#case_mappings

Parameters:
c the code point to be mapped
Returns:
the Simple_Uppercase_Mapping of the code point, if any; otherwise the code point itself.
Stable:
ICU 2.0
UBlockCode ublock_getCode ( UChar32  c  ) 

Returns the Unicode allocation block that contains the character.

Parameters:
c the code point to be tested
Returns:
the block value (UBlockCode) for c
See also:
UBlockCode
Stable:
ICU 2.0
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Friends Defines

Generated on Sat Jan 23 15:17:36 2010 for ICU 4.3.4 by  doxygen 1.6.1